このコンテンツは現在、元の言語で提供されています。
繁殖と植物の手入れ卸売に関するお問い合わせ
GF Flow Meter
モデル/SKU: 3-2536-P0
Insertion Flow Meter for 1/2 to 4 Inch Pipes
- Pipe size range
- DN15 to DN100 (1/2 in to 4 in)
- Sensor type
- Insertion paddlewheel (GF Signet Rotor-X)
- Flow range
- 0.1 to 6 m/s (0.3 to 20 ft/s)
- Turndown ratio
- 66:1
出典参考価格JPY 102,578
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
Insertion Flow Meter for 1/2 to 4 Inch Pipes
Product details
- The 2536-P0 Rotor-X taps into pipes from DN15 to DN100 — that's 1/2 to 4 inch nominal in standard PVC, CPVC, or carbon-steel schedules.
- The polypropylene body, black PVDF rotor, titanium pin, and FPM O-ring shrug off water, mild acids, and standard fertigation chemistry.
- A wide 0.1 to 6 m/s (0.3 to 20 ft/s) range covers low-flow drip headers up to high-volume mains.
- The 66:1 turndown ratio means one sensor handles morning irrigation and night recirculation on the same line.
- Paddlewheel Flow Sensor with Open-Collector Output for PLC and Growlink
- The open-collector sinking output runs up to 10 mA.
- A Growlink Connect Controller, Precision Irrigation Controller, or any PLC reads the pulses without a signal conditioner.
- Linearity holds at ±1% of max range and repeatability at ±0.5%, both referenced to 25°C.
- The sensor lands in a standard 1.5 in NPT or compatible installation saddle.
- On most live lines, you can hot-tap with the right shutoff valve in place — no system drain.
- 0.1 to 6 m/s flow range (0.3 to 20 ft/s): Single sensor covers drip headers, sub-mains, and high-volume distribution.
- 66:1 turndown ratio: Tracks morning recirculation and afternoon main flow without swapping hardware.
- ±1% linearity, ±0.5% repeatability: Lab-grade accuracy at 25°C, holding through normal greenhouse swings.
- Open-collector sinking output, 10 mA: Reads on any Growlink controller, PLC, or pulse counter without a conditioner.
- PP body, PVDF rotor, titanium pin, FPM O-ring: Chemistry compatible with water, mild acids, and standard fertigation feeds.
- Hot-tap install on live lines: Insertion saddle + isolation valve lets you mount without draining the system.
- Technical Specifications
仕様
- Sensor type
- Insertion paddlewheel (GF Signet Rotor-X)
- Pipe size range
- DN15 to DN100 (1/2 in to 4 in)
- Flow range
- 0.1 to 6 m/s (0.3 to 20 ft/s)
- Turndown ratio
- 66:1
- Output
- Open-collector sinking, 10 mA max
- Max pressure
- 180 psi @ 68°F (12.4 bar)
- Pressure derating
- 25 psi @ 185°F
- Operating temperature
- 0 to 185°F
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。