このコンテンツは現在、元の言語で提供されています。
栄養剤と培地卸売に関するお問い合わせ
Dosatron DOSAKLEAN CLEANSER
モデル/SKU: CLEANSER-ALL-25
DosaKlean Cleanser Soak for Dosatron Injector Maintenance
- SIZE
- box of 25 packets, pail of 100 packets
- Packet Net Weight
- .187 lb
- Compatible Materials
- Plastic and stainless steel injectors
- Pack Options
- Box of 25 packets; pail of 100 packets
出典参考価格JPY 36,607
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
DosaKlean Cleanser Soak for Dosatron Injector Maintenance
Product details
- Scale builds inside a proportional injector long before the dose drifts far enough to notice.
- DosaKlean is the answer to that: a water-soluble concentrate sold in .187 lb packets, made to dissolve rust, calcification and mineral deposits from injector parts.
- The blend combines descaling compounds, surfactants, and natural and artificial ingredients.
- The soak itself takes very little effort.
- Take the injector apart and rinse every part in clean water to clear any chemical residue.
- Dissolve one packet in 1 gallon of water, one packet per injector, and soak the parts for 24 to 48 hours.
- Larger injectors take two packets in 2 gallons.
- Pull the parts, rinse them thoroughly with clean water, and reassemble.
- There is no scrubbing step.
- While it cleans, the solution also lubricates the internal seals and moving components, so the piston and motor go back together moving freely.
- A Fertilizer Injector Cleaner That Belongs in the Service Routine
- Most growers pair the soak with the seal change, since the injector is already in pieces on the bench.
- That turns a scale problem into a routine job instead of a dead motor halfway through a feed cycle.
- Calcium nitrate, hard well water and acid injection all leave deposits, so stations running those tend to need it more often.
- The formula is safe on both plastic and stainless steel injectors.
- Use it on its own and do not mix it with other products.
- Store unopened packets in a cool, dry place between service days.
- The real trade-off is downtime.
- A full soak takes the injector out of service for a day or two.
- A spare unit or a planned plain-water day keeps crops on schedule.
- Rinse thoroughly before reassembly, since residue left on the parts ends up in the first tank of feed.
- As a fertilizer injector cleaner it is maintenance, not a repair: worn seals still need replacing.
- Water-soluble concentrate: Dissolves in plain water, so there is nothing to measure beyond one packet per gallon.
- Removes rust and scale: Lifts rust, calcification and mineral deposits from injector parts without scrubbing.
- Lubricates as it cleans: Treats interior seals and moving components during the same soak, so parts reassemble smoothly.
- Safe on injector materials: Cleans plastic and stainless steel injector parts without harming either.
- Pre-measured packets: Each .187 lb packet treats one injector, and larger units take two packets in two gallons.
- Technical Specifications
仕様
- Packet Net Weight
- .187 lb
- Compatible Materials
- Plastic and stainless steel injectors
- Pack Options
- Box of 25 packets; pail of 100 packets
- Safe on injector materials
- Cleans plastic and stainless steel injector parts without harming either.
- SIZE
- box of 25 packets, pail of 100 packets
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。