このコンテンツは現在、元の言語で提供されています。
水耕栽培と灌漑卸売に関するお問い合わせ
Dilution Solutions Micro-Doser - Etatron eOne MF Micro Dosing Pump Panel
モデル/SKU: 709171
Dilution Solutions Micro-Doser Built on the Etatron eOne MF
- Power supply
- 100 to 250 VAC, 50/60 Hz
- Line size
- 3/4 in or 1.5 in (by variant)
- Flow rate
- 1 L/h (0.26 GPH)
- Maximum pressure
- 10 bar (145 PSI)
出典参考価格JPY 253,689
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
Dilution Solutions Micro-Doser Built on the Etatron eOne MF
Product details
- The Micro-Doser is an assembled injection panel built around the Etatron eOne MF 0110, a microprocessor diaphragm pump made for proportional dosing.
- A water meter on the panel reads flow in the main line, and the pump adds concentrate in step with it.
- The pump delivers up to 1 L/h, about 0.26 GPH, against as much as 10 bar (145 PSI).
- It runs up to 180 impulses per minute with an adjustable stroke, so the dose can sit at a fraction of a millilitre per gallon.
- A backlit graphic display handles the programming.
- The wetted path is built for concentrates, with a PVDF pump head, PTFE diaphragm, TFE/P seals and ceramic ball valves.
- The panel arrives plumbed on polyethylene board with the meter, check valve, pressure relief valve, injection valve, unions and a mixing chamber.
- Suction comes through a PVC tube with a foot filter, and separate PVC priming and polyethylene discharge tubes complete the kit.
- The pump accepts a 100 to 250 VAC supply at 50/60 Hz.
- Panels come in 3/4 in and 1.5 in line sizes, each in left-to-right or right-to-left flow.
- A tank is not included, so plan a container for the concentrate.
- Where a Micro Dosing Pump Fits in a Fertigation Room
- Super-concentrated additives are the usual job, the bottles whose label rate sits below what a typical water-powered injector meters well.
- Mount the panel on a wall close to the irrigation header, with the flow arrow matching the direction water travels.
- That is why orientation matters, since each panel is plumbed for one flow direction across the wall.
- Prime the pump through the priming tube before the first run, so no air sits in the head.
- Keep the foot filter off the bottom of the concentrate tank, where sediment settles.
- The pressure relief valve protects the line if a downstream valve closes while the pump is still stroking.
- Flush the head and injection valve with clean water when switching products.
- The honest limit is volume.
- At about a litre an hour it is made for small, potent doses, not for base nutrients.
- Heavy feed belongs on a larger injector, with this panel layered on top for the expensive bottle.
- Etatron eOne MF 0110 Pump: A microprocessor diaphragm pump doses in proportion to the water meter reading.
- 1 L/h at 10 bar: Output suits super-concentrated additives on a pressurized fertigation line.
- Adjustable Stroke: Up to 180 impulses per minute with stroke control holds very low dose rates.
- Chemical-Resistant Wetted Parts: PVDF head, PTFE diaphragm, TFE/P seals and ceramic balls handle concentrates.
- Fully Plumbed Panel: Water meter, check, relief and injection valves, unions and a mixing chamber come assembled.
- Two Sizes, Two Directions: Choose a 3/4 in or 1.5 in line size in left-to-right or right-to-left flow.
仕様
- Flow rate
- 1 L/h (0.26 GPH)
- Maximum pressure
- 10 bar (145 PSI)
- Dosing frequency
- Up to 180 impulses per minute
- Power supply
- 100 to 250 VAC, 50/60 Hz
- Line size
- 3/4 in or 1.5 in (by variant)
- Flow direction
- Left to right or right to left (by variant)
- Option
- 0.75 in - (Left to Right), 0.75 in - (Right to Left), 1.5 in - (Right to Left), 1.5 in - (Left to Right)
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。