このコンテンツは現在、元の言語で提供されています。
照明アクセサリー卸売に関するお問い合わせ
DAB E.SYWALL Mount Bracket · Wall Kit for E.SYBOX & E.SYBOX Mini 3
モデル/SKU: 727952
DAB E.SYWALL Mount Bracket for E.SYBOX and E.SYBOX Mini 3
- Package dimensions
- 14 x 10 x 2 in
- Compatible pumps
- E.SYBOX, E.SYBOX Mini 3
- Kit contents
- Brackets, screws, wall dowels, 2 shock-absorbing spacers
- Package weight
- 2.2 lb
出典参考価格JPY 28,121
参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。
料金は一切不要です。お客様のニーズについてお話ししましょう。
工場直送サポート15年以上の経験
さらに詳しく見てみよう
この製品についてもう少し詳しく
DAB E.SYWALL Mount Bracket for E.SYBOX and E.SYBOX Mini 3
Product details
- The E.SYWALL is the bracket set DAB makes for hanging an E.SYBOX or E.SYBOX Mini 3 on a wall, off the floor.
- The kit carries part number 60161442 and ships with brackets, screws, wall dowels and two shock-absorbing spacers.
- Packed, the whole set measures about 14 x 10 x 2 in and weighs roughly 2.2 lb.
- The brackets fasten to the pump body and to the wall, so the unit hangs as one tidy block.
- Those spacers sit between the pump and the mounting surface.
- They soak up motor vibration before it reaches masonry or a stud wall.
- That matters most when the pump shares a wall with an office, a dry room or a neighbor.
- Lifting the unit off the floor also keeps it clear of standing water when a reservoir overflows or a fitting lets go.
- In a fertigation room, floor space usually belongs to tanks, mixing carts and injectors.
- Hanging the booster frees that area and shortens the run to an overhead manifold.
- Plan the drill pattern before mounting, since a full pump is a heavy, awkward lift.
- Fitting the Wall Mounting Kit in a Grow or Utility Room
- Most installs put the booster at about shoulder height beside the reservoir it draws from.
- That makes the display easy to read and the filling plug easy to reach when priming.
- Use flexible connectors or braided hose between the pump and hard pipe, so the brackets are not carrying plumbing strain.
- Solid masonry takes the supplied dowels well.
- On drywall, find a stud or back the bracket with a plywood panel first.
- Keep the suction line short and free of high points, so air does not collect on its way to the pump.
- Tighten the wall screws before hanging the pump, then check them again after the first week of cycling.
- This kit fits only the E.SYBOX and the E.SYBOX Mini 3.
- Twin-pump layouts use the E.SYTWIN station instead, so confirm which unit you run before fitting it.
- Once mounted, the pump runs, primes and services exactly as it would on the floor.
- Complete kit: Brackets, screws, wall dowels and spacers arrive together, so the install needs no separate hardware run.
- Shock-absorbing spacers: Two spacers isolate motor vibration from the wall, which keeps a booster quiet in rooms people work in.
- Matched fit: Made for the E.SYBOX and E.SYBOX Mini 3 housings, so the pump sits square and level on the wall.
- Off-floor placement: Raising the pump frees floor space for tanks and keeps it out of standing water after a spill.
- Unchanged service access: Display, filling plug and service bay stay reachable, so priming and checks work as they do on the floor.
- Technical Specifications
仕様
- Compatible pumps
- E.SYBOX, E.SYBOX Mini 3
- Kit contents
- Brackets, screws, wall dowels, 2 shock-absorbing spacers
- Package dimensions
- 14 x 10 x 2 in
- Package weight
- 2.2 lb
あなたのプロジェクトに役立てましょう
お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。
保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。
探検を続けよう
すべての商品を見る空間の可能性がさらに広がります
照明アクセサリー
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
出典元JPY 47,774
質問とディスカッション
質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。