より明るい成長の道。工場直送卸売。 15年以上にわたる専門知識の蓄積

このコンテンツは現在、元の言語で提供されています。

換気と気候卸売に関するお問い合わせ

8 inch Backdraft Damper

モデル/SKU: VTBDD8

Where an 8 inch Backdraft Damper Earns Its Place

Duct size
Eight inches, which covers most single room extraction runs
Duct diameter
8 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
出典参考価格JPY 4,178

参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。

料金は一切不要です。お客様のニーズについてお話ししましょう。

工場直送サポート15年以上の経験
さらに詳しく見てみよう

この製品についてもう少し詳しく

Where an 8 inch Backdraft Damper Earns Its Place

Product details

  • Eight inches is where a lot of single room extraction ends up.
  • It is also the size where backflow starts costing money rather than merely being a nuisance.
  • A duct this diameter moves a serious volume in either direction.
  • With the fan off, an eight inch open run will let cold air, smell and roof dust travel back into a room all night.
  • Sealed rooms lose their pressure relationship the same way.
  • This damper stops that with two galvanized blades hung on independent hinges.
  • Independence is the part to look for in any damper, because a shared shaft turns one stuck blade into two.
  • The whole assembly inserts into the duct, so there is no flange, no adaptor and no transition piece.
  • It installs in any orientation, which matters on a vertical riser as much as on a horizontal run.
  • The Neoprene Gasket and What a Bad Seal Costs
  • The blades close onto a neoprene perimeter gasket rather than onto bare steel.
  • That choice does two jobs at once.
  • It takes the clang out of a closure, which is a real consideration in a building where people sleep or work nearby.
  • It also fills the gap that a metal edge always leaves.
  • On a duct this size a thin gap around the circumference adds up to a meaningful leak.
  • Keep the gasket in mind through the life of the installation.
  • Dust builds on the sealing face, resin from a room carries into the duct, and a face that cannot seat cleanly leaks quietly for months.
  • Wipe it when the filter is serviced.
  • Atmosphere quote an opening requirement of four to eight hundredths of an inch of static pressure.
  • Any reasonably specified eight inch fan exceeds that at full speed.
  • Check it at the lowest speed the fan will actually be run, not at full.
  • Duct size: Eight inches, which covers most single room extraction runs
  • Function: Prevents backflow of cold air, odour and dust when the fan stops
  • Blades: Two galvanized blades, each on an independent hinge
  • Seal: Neoprene perimeter gasket, not a bare metal edge
  • Noise: The gasket takes the clang out of every closure
  • Leakage: A gasketed face closes the gap a metal edge always leaves
  • Mounting: The assembly inserts into the duct with no flange needed

仕様

Duct diameter
8 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Mounting
The whole assembly inserts into the duct
Opening pressure
0.04 to 0.08 in of static pressure
Duct size
Eight inches, which covers most single room extraction runs
Noise
The gasket takes the clang out of every closure

あなたのプロジェクトに役立てましょう

お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。

保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。

一緒に成長しよう

質問とディスカッション

0

質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。

探検を続けよう

空間の可能性がさらに広がります

すべての商品を見る
良いことの始まり

あなたのプロジェクトを世に知らしめましょう。

お客様のご要望について少しお聞かせください。いただいた情報をもとに、適切な卸売りのご提案をさせていただきます。

商品リスト

料金は一切かかりません。義務も一切ありません。ただ、有益な会話を楽しみたいだけです。