より明るい成長の道。工場直送卸売。 15年以上にわたる専門知識の蓄積

このコンテンツは現在、元の言語で提供されています。

換気と気候卸売に関するお問い合わせ

4 inch Backdraft Damper

モデル/SKU: VTBDD4

What a 4 inch Backdraft Damper Is Stopping

Duct size
Four inches, matching a four inch inline fan or run
Duct diameter
4 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
出典参考価格JPY 3,832

参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。

料金は一切不要です。お客様のニーズについてお話ししましょう。

工場直送サポート15年以上の経験
さらに詳しく見てみよう

この製品についてもう少し詳しく

What a 4 inch Backdraft Damper Is Stopping

Product details

  • A duct with nothing in it is a two way street.
  • When the fan is off, outside air walks back down the run, bringing cold, smell and whatever is living in the roof space with it.
  • On a sealed room it also breaks the pressure relationship you built the extraction around.
  • A backdraft damper closes that street in one direction.
  • Two blades sit inside the body, each on its own independent hinge.
  • That independence is the design detail worth paying for, because a single shared shaft means one sticky blade holds the other open.
  • The body is galvanized steel and the whole assembly pushes into the duct, so there is no flange to fit and no transition to build.
  • It installs in any orientation.
  • The blades close onto a neoprene perimeter seal rather than metal onto metal, which is what makes the closure quiet as well as tight.
  • Why Static Pressure Decides Whether It Opens at All
  • One figure matters more on a small duct than anywhere else.
  • The blades need between four and eight hundredths of an inch of static pressure before they lift.
  • That is not very much pressure at all.
  • A small fan at the end of a long flexible run, with a loaded carbon filter in front of it, does not always make it.
  • The symptom is a fan that runs while nothing moves, and the cause looks like a dead fan rather than a shut damper.
  • Two habits between them avoid it entirely.
  • Keep the run short and use rigid duct where the layout allows, since flexible duct costs several times the resistance for the same length.
  • Second, check the damper by hand at commissioning with the fan at its lowest intended speed rather than at full.
  • A unit that will be run at thirty percent overnight needs to open at thirty percent.
  • The damper is sized for a four inch duct and suits the smaller Vortex in-line fans.
  • Duct size: Four inches, matching a four inch inline fan or run
  • Function: Stops air travelling back down the duct when the fan is off
  • Blades: Two, each on an independent hinge so neither can jam the other
  • Seal: A neoprene perimeter gasket rather than metal onto metal
  • Noise: That gasket is what makes the closure quiet as well as tight
  • Body: Galvanized steel throughout the housing and both blades
  • Mounting: The whole assembly inserts into the duct, with no flange to fit
  • Orientation: Installs in any position

仕様

Duct diameter
4 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Mounting
The whole assembly inserts into the duct
Opening pressure
0.04 to 0.08 in of static pressure
Duct size
Four inches, matching a four inch inline fan or run
Noise
That gasket is what makes the closure quiet as well as tight

あなたのプロジェクトに役立てましょう

お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。

保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。

一緒に成長しよう

質問とディスカッション

0

質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。

探検を続けよう

空間の可能性がさらに広がります

すべての商品を見る
良いことの始まり

あなたのプロジェクトを世に知らしめましょう。

お客様のご要望について少しお聞かせください。いただいた情報をもとに、適切な卸売りのご提案をさせていただきます。

商品リスト

料金は一切かかりません。義務も一切ありません。ただ、有益な会話を楽しみたいだけです。