より明るい成長の道。工場直送卸売。 15年以上にわたる専門知識の蓄積

このコンテンツは現在、元の言語で提供されています。

換気と気候卸売に関するお問い合わせ

12 inch Backdraft Damper

モデル/SKU: VTBDD12

Sizing a 12 inch Backdraft Damper Into a Big Run

Duct diameter
12 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Mounting
The whole assembly inserts into the duct
出典参考価格JPY 8,257

参考情報としてのみご利用ください。現在の卸売価格、在庫状況、配送条件についてはお問い合わせください。

料金は一切不要です。お客様のニーズについてお話ししましょう。

工場直送サポート15年以上の経験
さらに詳しく見てみよう

この製品についてもう少し詳しく

Sizing a 12 inch Backdraft Damper Into a Big Run

Product details

  • At twelve inches everything about a damper is bigger, including the consequences of getting it wrong.
  • An open duct this size is a substantial hole in a building.
  • With the fan off it moves cold air, odour and dust in the wrong direction continuously.
  • On a room built around a pressure relationship, that undoes the whole design.
  • The two blades here are correspondingly large plates, which is why the hinge arrangement matters.
  • Each blade has its own hinge, so a blade that catches on debris does not hold its partner open with it.
  • Galvanized steel keeps plates this size rigid enough to seat properly for years in a humid duct.
  • A neoprene perimeter gasket takes the closure.
  • On a plate this size that is the difference between a soft thud and a bang carrying through a building.
  • Installing a Duct Insert of This Diameter
  • The assembly pushes into the duct rather than mounting on a flange, which at this diameter saves genuine work.
  • There is no transition piece to fabricate and nothing to line up beyond the duct itself.
  • It installs in any orientation.
  • Two things deserve attention at this size.
  • Support the duct on both sides of the damper properly.
  • A twelve inch run carries real weight, and a sagging duct distorts the housing until the blades no longer seat.
  • The second is access to it afterwards.
  • A damper buried in a ceiling void where nobody can reach it will eventually stop sealing and nobody will know.
  • Atmosphere quote an opening requirement of four to eight hundredths of an inch of static pressure.
  • A correctly specified twelve inch fan clears that easily at speed.
  • Confirm it at low speed too.
  • Check the swing and wipe the sealing face at every filter service.
  • Why it matters: An open duct this size is a substantial hole in a building
  • Blades: Two large plates, each on its own independent hinge
  • Hinge design: A blade that catches cannot hold its partner open
  • Body: Galvanized steel, stiff enough to keep large plates seating
  • Seal: Neoprene perimeter gasket, which softens the closure
  • Mounting: Inserts into the duct, with no transition piece to fabricate

仕様

Duct diameter
12 in
Type
Round backdraft damper, duct insert
Material
Galvanized steel
Mounting
The whole assembly inserts into the duct
Opening pressure
0.04 to 0.08 in of static pressure
Support
Hold the duct both sides so the housing cannot distort

あなたのプロジェクトに役立てましょう

お問い合わせの際は、数量、配送先、栽培地域、電圧やプラグに関するご要望を明記してください。仕様、在庫状況、配送条件、保証条件は、書面による見積書にてご確認いただけます。

保存された為替レートを使用した参照換算 2026/11/15. 換算された金額は見積もりではありません。

一緒に成長しよう

質問とディスカッション

0

質問や役立つ情報があれば、ぜひ共有してください。会話を始めましょう。

探検を続けよう

空間の可能性がさらに広がります

すべての商品を見る
良いことの始まり

あなたのプロジェクトを世に知らしめましょう。

お客様のご要望について少しお聞かせください。いただいた情報をもとに、適切な卸売りのご提案をさせていただきます。

商品リスト

料金は一切かかりません。義務も一切ありません。ただ、有益な会話を楽しみたいだけです。