Questo contenuto è attualmente disponibile nella sua lingua originale.
Water Content Sensor 3 with splitter cable set
Modello / SKU: WCS-3
This probe reports the moisture in a grow medium as volumetric water content, shown as a percentage.
- Power
- 12 V DC, 100 to 200 mA
- Package size
- 170 x 90 x 54 mm
- Model
- WCS-3
- Connection
- M12, daisy-chain
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
This probe reports the moisture in a grow medium as volumetric water content, shown as a percentage.
Product details
- What the TrolMaster WCS-3 Measures
- Three slim prongs slide into coco coir, rock wool or soil with little displacement, even in small cubes.
- A built-in LCD wakes when the sensor is tapped or moved and shows the live VWC reading.
- Data also flows to the controller, which can raise alarms and send mobile alerts when moisture passes a setpoint.
- Sensors connect over M12 cable and daisy-chain with the included T-splitter.
- Aqua-X Pro and Hydro-X Pro accept up to 50 sensors, Aqua-X Plus up to 20, Aqua-X up to 8 and Tent-X one.
- The probe runs on 12 V supplied by the system and draws 100 to 200 mA.
- It is rated for 32 to 122 °F and below 90% humidity, and carries CE, FCC and ETL marks.
- The set includes the sensor, an M12 T-splitter and a 4 ft M12 cable.
- Using a Water Content Sensor to Steer Irrigation
- A water content sensor turns irrigation timing from guesswork into a number the whole team can read.
- Insert the prongs fully into the substrate, keeping them away from the pot wall and the drip emitter.
- Place sensors in blocks or pots that represent the room, not the wettest or driest corner.
- Watch the overnight dryback, the drop in VWC between the last and first irrigation.
- A larger dryback pushes plants toward generative growth, while a smaller one keeps them vegetative.
- Set high and low alarms so the controller flags a stuck valve or a failed pump quickly.
- Link the readings to Aqua-X so pump events can start or stop on moisture rather than the clock alone.
- Add sensors across zones as the room grows, chaining them with M12 splitters.
- Keep the probe clean and reseat it after each media change so readings stay comparable.
- Log the data across a crop to fine-tune the next run.
- With steady readings, irrigation decisions become repeatable from one harvest to the next.
- VWC readings: Moisture shown as a percentage of the medium.
- Slim three-prong probe: Fits small rock wool cubes and coco pots.
- Tap-to-wake LCD: Live reading at the plant without opening the app.
- M12 daisy-chain: Up to 50 sensors on Aqua-X Pro or Hydro-X Pro.
- Alerts and crop steering: Setpoint alarms and mobile notifications.
- Technical Specifications
Specifiche
- Model
- WCS-3
- Connection
- M12, daisy-chain
- Power
- 12 V DC, 100 to 200 mA
- Certifications
- CE, FCC, ETL
- Package size
- 170 x 90 x 54 mm
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
Yield Lab Heat Mat Thermostat Temperature Controller
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.