Questo contenuto è attualmente disponibile nella sua lingua originale.
TrolMaster Sensor Bracket (2-pack)
Modello / SKU: TSB-1
How the TrolMaster TSB-1 Holds a Sensor
- Package size
- 85 x 68 x 67 mm
- Model
- TSB-1
- Contents
- 2 holders (mounts 1 sensor)
- Compatible sensors
- MBS-K30, MBS-PRO
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
How the TrolMaster TSB-1 Holds a Sensor
Product details
- This set contains two holders that work together to mount one sensor.
- TrolMaster shaped them specifically for the MBS-K30 and MBS-PRO sensor bodies.
- Curved edges wrap around the sensor and lock it in place, so it cannot slide or twist.
- Each holder fixes flat to a wall or post.
- Holders also join to one another with a mortise-and-tenon joint when a longer mount is needed.
- The low profile keeps the sensor tidy against the wall rather than hanging loose on its cable.
- That matters because a swinging sensor reads the air in a different spot from one minute to the next.
- The brackets are rated for the same 32 to 122 °F and 90% humidity range as the sensors they carry.
- The pack ships in a box about 85 x 68 x 67 mm.
- Placing a Sensor Mounting Bracket for Accurate Readings
- A sensor mounting bracket only helps if it sits in the right place, so plan the position before drilling.
- TrolMaster recommends hanging temperature, humidity and CO2 sensors at canopy height.
- The MBS-K30 CO2 sensor used with Carbon-X belongs lower, at the bottom of the canopy.
- Pick a spot with normal room airflow, away from the direct blast of a fan or humidifier.
- Keep the sensor out of direct light from fixtures, which can heat the housing and skew readings.
- Mark the holes with the sensor in the brackets, then fix the brackets with screws suited to the wall.
- Seat the sensor and route its cable along the wall so it does not pull on the housing.
- Move the brackets up as the crop grows, keeping the sensor in step with the canopy.
- In larger rooms, a set for each sensor keeps every reading consistent.
- Wipe dust off the sensor during routine cleaning.
- Fitted this way, the brackets turn a dangling sensor into a fixed, reliable data point.
- Custom fit: Shaped for MBS-K30 and MBS-PRO sensors.
- Two holders per pack: Together they mount one sensor.
- Curved locking edges: Hold the sensor firmly in place.
- Joinable design: Holders link with a mortise-and-tenon joint.
- Technical Specifications
Specifiche
- Model
- TSB-1
- Contents
- 2 holders (mounts 1 sensor)
- Compatible sensors
- MBS-K30, MBS-PRO
- Mounting
- Wall mount, joinable holders
- Package size
- 85 x 68 x 67 mm
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
Yield Lab Heat Mat Thermostat Temperature Controller
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.