Questo contenuto è attualmente disponibile nella sua lingua originale.
Trolmaster 1.5 Digital Flow Meter
Modello / SKU: DFM-3
This meter installs inline on a 1.5 in water or nutrient main.
- Pipe size
- 1.5 in
- Package size
- 255 x 135 x 80 mm
- Model
- DFM-3
- Flow range
- 1.32 to 39.62 GPM (5 to 150 L/min)
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
This meter installs inline on a 1.5 in water or nutrient main.
Product details
- What the TrolMaster DFM-3 Reads
- It covers flows from 1.32 to 39.62 GPM (5 to 150 L/min).
- A 1 in LCD on the body shows the live flow rate and the running total at the pipe.
- The data also travels over a 16 ft RJ12 cable to the Aqua-X Pro.
- It connects to the controller directly or through an SPH-1 RJ12 splitter hub.
- With the Aqua-X Pro Feed by Volume function, every irrigation cycle stops at a set volume.
- The body uses BSP threads, with two BSP-to-NPT adaptors fitted at the factory.
- It is rated to 250 psi and works from 32 to 122 °F.
- The meter carries CE, FCC and ETL marks and weighs about 1.37 lb packed.
- Placing a 1.5 Inch Flow Meter on a Main Line
- A 1.5 inch flow meter belongs where a large pump feeds a whole room or several zones.
- Install it downstream of the pump and filter, before the line branches to the zone valves.
- Orient it with the direction of flow and support heavy pipe on both sides of the meter.
- Use PTFE tape on the NPT adaptors and tighten without forcing the fittings.
- Keep the LCD facing the walkway so readings can be checked on every round.
- Run the RJ12 cable to the Aqua-X Pro or an SPH-1 hub, away from wet areas.
- Enter each zone's target volume and confirm the first totals with a measured fill.
- A total that climbs on an unchanged program points to a leak worth chasing.
- A total that falls often means filters or drippers need attention.
- Flush the pipework before installation so debris does not catch inside the meter.
- Installed with care, it keeps large rooms on a consistent, measurable feed.
- 1.32 to 39.62 GPM range: Sized for 1.5 in irrigation mains.
- On-board LCD: Live flow rate and total volume at the pipe.
- Feed by Volume: Aqua-X Pro doses each cycle by gallons.
- Technical Specifications
Specifiche
- Model
- DFM-3
- Pipe size
- 1.5 in
- Flow range
- 1.32 to 39.62 GPM (5 to 150 L/min)
- Output
- Flow rate and total volume
- Compatible controller
- Aqua-X Pro (direct or via SPH-1 hub)
- Certifications
- CE, FCC, ETL
- Package size
- 255 x 135 x 80 mm
- Gross weight
- 1.37 lb
- Feed by Volume
- Aqua-X Pro doses each cycle by gallons.
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
‘Wood Lovr’ Organic Hardwood-Based Sterile Mushroom Substrate
‘Boomr Bag’ Manure-Based Sterile Mushroom Bulk Substrate
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.