Questo contenuto è attualmente disponibile nella sua lingua originale.
ThinkGrow Unit-Strut Hanger for Model-I & Plus
Modello / SKU: UH-2
ThinkGrow UH-2 Mounts Model-I Fixtures Directly to Unistrut
- Compatible fixtures
- ThinkGrow Model-I, Model-I Plus
- Not compatible with
- Model-H, Model-W, Model-V (use UH-1)
- Made for Model-I
- Fits ThinkGrow Model-I and Model-I Plus fixtures.
- Direct Unistrut Mount
- Fits standard 1-5/8 in metal framing channel.
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
ThinkGrow UH-2 Mounts Model-I Fixtures Directly to Unistrut
Product details
- Commercial rooms built on Unistrut often skip ratchet hangers altogether.
- The UH-2 lets a Model-I fixture hang straight from the channel.
- It is made for the ThinkGrow Model-I and Model-I Plus LED fixtures.
- It fits standard 1-5/8 in metal framing channel.
- A quick release design lets the light come down for cleaning or service without loosening the strut hardware.
- Mounting tight to the ceiling leaves more room between the fixture and the canopy.
- That extra headroom helps in low rooms and multi-tier racks.
- It is sold for Model-I rooms where fixtures hang from a strut grid.
- Model-H, Model-W and Model-V fixtures use a different hanger, the UH-1.
- No ceiling channel or anchors are included.
- Installing a Model-I Unistrut Hanger
- Lay out the strut so it lines up with the Model-I hanging points.
- Confirm the channel and anchors are rated for the full fixture weight.
- Attach a UH-2 at each hanging point the fixture manual specifies.
- Raise the fixture and engage the quick release until it locks in place.
- Check that the light is level before connecting power.
- Route power and control cables away from the release mechanism.
- To service the light, open the release and lower the fixture by hand.
- The hanger holds a fixed height, so set canopy distance with dimming or bench height.
- Overhead mounting in commercial rooms is handled by a licensed installer.
- See the ThinkGrow Model-I Plus for a compatible fixture.
- Made for Model-I: Fits ThinkGrow Model-I and Model-I Plus fixtures.
- Direct Unistrut Mount: Fits standard 1-5/8 in metal framing channel.
- Quick Release: Lowers the fixture for service without removing strut hardware.
- Low-Ceiling Friendly: Keeps the light close to the ceiling.
- Service Friendly: Quick release makes cleaning and maintenance faster.
- Technical Specifications
Specifiche
- Compatible fixtures
- ThinkGrow Model-I, Model-I Plus
- Not compatible with
- Model-H, Model-W, Model-V (use UH-1)
- Made for Model-I
- Fits ThinkGrow Model-I and Model-I Plus fixtures.
- Direct Unistrut Mount
- Fits standard 1-5/8 in metal framing channel.
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
Yield Lab Professional Series Double Ended Grow Light Reflector
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.