Questo contenuto è attualmente disponibile nella sua lingua originale.
Sero Bus Cable, 20 ft
Modello / SKU: 705155
Sero 20 ft Bus Cable for Full-Room Runs
- Type
- System bus cable
- Length
- 20 ft
- Compatibility
- Sero System
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
Sero 20 ft Bus Cable for Full-Room Runs
Product details
- Larger rooms spread their equipment out, and the control network has to follow.
- A component on the far wall may sit well away from the controller.
- This Sero cable covers that span at 20 feet.
- It links one component to the next across the room in a single run.
- That avoids joining shorter cables together along the way.
- Fewer joins mean fewer connections to check and fewer places for trouble.
- Sero states that only its approved bus cables should connect system components.
- Using the matched cable keeps the network within the system design.
- Each cable connects one pair of units.
- Measure along the actual route, including climbs over doorways and drops to equipment.
- Route plans that hug walls or ceilings usually need more length than a straight line suggests.
- Running Bus Wire Overhead or Along Walls
- Power down the system before connecting or removing a bus cable.
- Plan the route overhead or along walls so it never crosses the floor.
- Use ceiling hangers, J-hooks or wall clips spaced evenly along the run.
- Avoid pulling the cable tight between supports.
- Leave a slack loop near each connector so the plug carries no strain.
- Stay clear of lights, ballasts, heaters and hot ducting.
- Cross power lines at right angles where the paths meet.
- Sleeve the cable in conduit where it passes through a wall or near moving equipment.
- Label both ends to match the components they serve.
- Restore power and check that every unit appears on the controller.
- Inspect the full run during maintenance for sagging, chafing or loose supports.
- 20 ft Length: Spans a full grow room.
- Single Run: No joins along the way.
- Sero Approved: Matched to Sero System components.
- One Link per Gap: Connects one unit to the next.
- Overhead Friendly: Hangs from hooks or wall clips.
Specifiche
- Type
- System bus cable
- Length
- 20 ft
- Compatibility
- Sero System
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
Yield Lab Professional Series Double Ended Grow Light Reflector
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.