Questo contenuto è attualmente disponibile nella sua lingua originale.
Ruck 8 Back Draught Dampner
Modello / SKU: 149394
How the 8 Inch Back Draught Damper Seals an Idle Duct
- Duct Size
- 8 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
How the 8 Inch Back Draught Damper Seals an Idle Duct
Product details
- Galvanized sheet steel housing, spring-loaded aluminium flaps, rubber seal at the seat.
- The flaps are held closed by spring pressure and opened by the fan, which means there is nothing to wire and nothing to fail electrically.
- On an 8 in duct it is the simplest way to stop reverse flow through an idle run.
- Mounting a Backdraft Shutter in the Right Place
- Because the flaps are sprung rather than gravity-hung, it works mounted horizontally or vertically.
- Put it downstream of the fan with the flaps opening the way the air goes.
- The honest cost is a small static pressure penalty, which on an 8 in run is usually irrelevant but is real.
- Check the rubber seat for dust when you service the fan; that is what makes a damper leak.
- If the flaps chatter at low speed, the fan is running below the pressure they need to stay open.
- Nudge the speed up a step.
- Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
- Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
- Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
- Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
- 8 in Duct Fit: Matches Ruck 8 in components and standard 8 in ducting.
- Fully Mechanical: No wiring, no actuator and no control signal to lose.
- Technical Specifications
Specifiche
- Duct Size
- 8 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.