Questo contenuto è attualmente disponibile nella sua lingua originale.
Ruck 12 Back Draught Dampner
Modello / SKU: 149477
How the 12 Inch Back Draught Damper Seals an Idle Duct
- Nothing about it is powered
- airflow alone opens it and spring pressure alone closes it.
- Duct Size
- 12 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
How the 12 Inch Back Draught Damper Seals an Idle Duct
Product details
- At 12 in the reverse draught through a stopped fan is substantial, and in winter it is expensive.
- The damper blocks it with spring-loaded aluminium flaps seating on a rubber seal, inside a galvanized sheet steel housing.
- Nothing about it is powered: airflow alone opens it and spring pressure alone closes it.
- Mounting a Backdraft Shutter in the Right Place
- Horizontal or vertical mounting both work, thanks to the spring rather than gravity holding the flaps shut.
- Install it after the fan, flaps opening downstream.
- There is a small pressure penalty to accept, and at this size it is a fair trade against the heat a stopped fan otherwise loses.
- Dust on the rubber seat is the usual failure mode, so wipe it when you service the run.
- A flap that rattles at low output means the fan is not making enough pressure to hold it open cleanly.
- Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
- Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
- Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
- Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
- 12 in Duct Fit: Matches Ruck 12 in components and standard 12 in ducting.
- Fully Mechanical: No wiring, no actuator and no control signal to lose.
- Technical Specifications
Specifiche
- Duct Size
- 12 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Nothing about it is powered
- airflow alone opens it and spring pressure alone closes it.
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.