Questo contenuto è attualmente disponibile nella sua lingua originale.
Quest Duct Kit (Hi-E 195)
Modello / SKU: 4039132
Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs
- Compatible models
- Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs
Product details
- This is the factory duct kit for the Quest Hi-E Dry 120 and Hi-E Dry 195 portable dehumidifiers, part number 4039132.
- A duct cover plate blocks off the opening the ducted setup no longer uses.
- Foam tape and a foam tape seal close the gaps between collar and cabinet so air goes where the duct sends it.
- Twelve 6-20 x 3/4 in screws and six 6-20 x 1/2 in screws mount everything to the cabinet.
- The installation sheet for the kit is TS-1059, written for the Hi-E series.
- The compatible units are the Hi-E Dry 120, Quest part 4036730, and the Hi-E Dry 195, part 4036710.
- Nothing else is needed from the dehumidifier side.
- Flex or rigid duct in matching sizes completes the run.
- Why Growers Fit a Dehumidifier Duct Kit
- A ducted dehumidifier can sit outside the canopy, in a hallway, mechanical closet or the plenum above.
- That keeps its heat and noise out of the room and frees floor space for plants.
- Dry supply air can then be thrown where airflow is weakest, which helps flatten pockets of high humidity.
- Keep duct runs short and smooth, since every bend and foot of flex adds static pressure and trims moisture removal.
- Seal every joint with foil tape so the unit is not pulling air from the attic or a wall cavity.
- Leave service access to the filter, because a ducted unit is easy to forget once it is out of sight.
- Plan the drain line at the same time, since a remote unit still needs a path for condensate.
- The kit carries a warning that a licensed, qualified electrician should do the work, so budget the install accordingly.
- 10 in Supply Collar: A round collar on the supply side connects standard 10 in duct to deliver dry air.
- Block-Off Plate: Seals the cabinet opening that a ducted layout no longer uses.
- Foam Seals and Hardware: Foam tape, foam seal and two sizes of screws make an airtight, secure fit.
- Fits Hi-E Dry 120 and 195: Made for Quest parts 4036730 and 4036710, the two Hi-E Dry portable units.
- Technical Specifications
Specifiche
- Compatible models
- Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.