Questo contenuto è attualmente disponibile nella sua lingua originale.
Quest 335 Duct Kit
Modello / SKU: 4042685
What the Quest 335 Duct Kit Includes
- Duct diameter
- 16 in
- Compatible models
- Quest 335 208/230 V (4042500), Quest 335 277 V (4042600), Quest 375 50 Hz (4046200-NC)
- Remote mounting
- Run the unit from a mechanical room or ceiling.
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
What the Quest 335 Duct Kit Includes
Product details
- This factory accessory converts a Quest 335 from a free-hanging unit into a ducted dehumidifier.
- In the box are an intake duct adapter, a duct adapter face, a duct plenum face and an exhaust duct plenum.
- Ten #10-24 hex-slotted screws and a 1/8 in drill bit come with it for fastening the parts to the cabinet.
- Both connections take 16 in round duct.
- Quest part number 4042685 fits the Quest 335 at 208/230 V (4042500) and at 277 V (4042600).
- It also fits the 50 Hz Quest 375 (4046200-NC).
- The 335 moves 900 CFM at 0.6 in WG with duct collars fitted, so the blower has pressure to spare for a short run.
- That lets the dehumidifier sit in a mechanical room or above a ceiling while dry air still reaches the canopy.
- Planning a Run With a Dehumidifier Duct Kit
- A dehumidifier duct kit makes sense when room space is tight, or when the unit's noise and heat belong somewhere else.
- Give each dehumidifier its own duct system rather than tying it into a fan or HVAC line.
- Keep each run to about 25 ft and as straight as possible, since every elbow adds resistance.
- Rigid pipe on a direct path holds airflow better than flex duct routed around obstacles.
- Drill only within the safe zones shown in the Quest 335 manual so screws stay clear of coils and wiring.
- Aim the discharge across the canopy or into a circulation path so dry air mixes instead of pooling.
- Seal every joint with foil tape to stop the unit pulling in air from the plenum space.
- Leave room to reach the end access panel, because the 22 x 20 x 2 in MERV-13 filter still needs regular changes.
- Installed this way, the 335 keeps its rated capacity while staying out of the growing space.
- 16 in connections: Round duct on both intake and discharge.
- Complete hardware: Adapters, plenum, screws and drill bit included.
- Factory fit: Quest part 4042685 for the Quest 335 cabinet.
- Remote mounting: Run the unit from a mechanical room or ceiling.
- Technical Specifications
Specifiche
- Duct diameter
- 16 in
- Compatible models
- Quest 335 208/230 V (4042500), Quest 335 277 V (4042600), Quest 375 50 Hz (4046200-NC)
- Remote mounting
- Run the unit from a mechanical room or ceiling.
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.