Un modo più luminoso per crescere. Vendita all'ingrosso direttamente dalla fabbrica. Oltre 15 anni di esperienza in continua crescita

Questo contenuto è attualmente disponibile nella sua lingua originale.

Idroponica e irrigazioneRichiesta all'ingrosso

Netafim Pulse Reed Switch

Modello / SKU: 70220-005300

What a Pulse Reed Switch Adds to a Water Meter

Power Required
None, passive switch
Volume Per Pulse
Determined by the water meter it is fitted to
Volume per pulse is set by the meter
Netafim meters ship in different pulse values, so check the register before you scale readings.
Prezzo di riferimento della fonteEUR 64.12

Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.

Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.

Assistenza diretta dalla fabbricaOltre 15 anni di esperienza
UNO SGUARDO PIÙ ATTENTO

Qualche informazione in più su questo prodotto

What a Pulse Reed Switch Adds to a Water Meter

Product details

  • A mechanical meter counts perfectly well and tells nobody.
  • This register sits on the meter and adds an electrical output.
  • No power is needed on the meter side, because the switch is passive.
  • Reading the Water Meter Pulse Output at the Controller
  • Any controller, datalogger or PLC with a digital input can take it, which is what makes a water meter pulse output so portable across equipment.
  • The controller does the arithmetic: count the pulses, multiply by the volume each pulse represents, and you have consumption.
  • That multiplier is set by the meter rather than by the switch, and Netafim meters are supplied in different pulse values.
  • Check the register on the meter you are fitting, because getting that number wrong scales every reading you log.
  • Two practical notes.
  • Reed contacts are mechanical and they do eventually wear, which is the usual reason one gets replaced rather than a fault in the meter itself.
  • And run the signal pair away from pump and light wiring, since a long unshielded run beside a contactor can pick up false counts.
  • Passive, no power needed: The switch takes nothing on the meter side.
  • The controller supplies the sensing circuit.
  • Volume per pulse is set by the meter: Netafim meters ship in different pulse values, so check the register before you scale readings.
  • A common replacement part: Reed contacts are mechanical and wear, which is usually why one is swapped.
  • Keep the run clean: Route the signal pair away from pump and lighting wiring to avoid false counts.
  • Technical Specifications

Specifiche

Power Required
None, passive switch
Volume Per Pulse
Determined by the water meter it is fitted to
Volume per pulse is set by the meter
Netafim meters ship in different pulse values, so check the register before you scale readings.

Facciamo in modo che funzioni per il tuo progetto

Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.

Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.

CRESCIAMO INSIEME

Domande e discussione

0

Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.

CONTINUA A ESPLORARE

Maggiori possibilità per il tuo spazio

Visualizza tutti i prodotti
L'INIZIO DI QUALCOSA DI BUONO

Diamo vita al tuo progetto.

Descrivici brevemente le tue esigenze. Utilizzeremo i tuoi dati per preparare un'offerta all'ingrosso personalizzata.

Il tuo elenco prodotti

Nessun compenso. Nessun obbligo. Solo una conversazione utile.