Questo contenuto è attualmente disponibile nella sua lingua originale.
Netafim Backflush Controller, 4 Outputs With DP Sensor, 24VAC, With Mounting Bracket
Modello / SKU: 00105-006210
Netafim Automatic Filter Backflush Controller With Valve Control
- Power Source
- 110 VAC 60 Hz or 220 VAC 50 Hz, built-in 24VAC supply
- Power Supply Fuse
- 2 A
- Mains powered
- 110 or 220 VAC with a built-in 24VAC supply.
- Dimensions
- 9-1/2 in H x 5-5/8 in L x 3-1/4 in D
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
Netafim Automatic Filter Backflush Controller With Valve Control
Product details
- A four-filter disc or media station flushes well only if inlet pressure holds up while one filter is cleaning.
- This Netafim model 31NBCAC4, item 00105-006210, handles that with 4 outputs and an option to control a downstream pressure sustaining valve.
- When a main valve is configured, it opens first and a pre-dwell gives pressure time to build.
- Valve 1 then flushes for the set time, followed by a dwell before valve 2, and so on through the station.
- An optional delay valve can be set alongside, with its own output just before the main valve.
- Power is 110 or 220 VAC, and a built-in supply delivers 24VAC to the solenoids.
- The embedded electronic DP sensor triggers a cycle when the pressure drop reaches the set point.
- Automatic disc, sand media and screen filters are all supported.
- The kit includes a mounting bracket for the 1.3 lb housing.
- Wiring and Checking a 4 Station Flush Controller
- Each pair of outputs sits on a plug-in card with terminals for Out A, Out B and a common.
- Always disconnect power before inserting or removing one of those cards.
- Wire the 24VAC solenoids to the outputs in the same sequence as the filters on the manifold.
- Bring the high-pressure command tube to the red port through a small 120 mesh filter, and the outlet tube to the black port.
- Set the DP delay so the reading must hold for 5 to 60 seconds before the controller acts.
- If the display stays dark, look first at the power LED on the supply.
- With the LED off, the 2 amp fuse may have blown or the mains feed may be missing.
- With the LED on, the Main Card should read 24 volts AC.
- The controller handles operating temperatures from 32 to 140°F.
- The case measures 9-1/2 x 5-5/8 x 3-1/4 in.
- Four 24VAC outputs: On two plug-in cards, expandable in pairs to 10.
- Pressure sustaining valve control: Main valve with pre-dwell from 5 s to 6 min.
- Optional delay valve and alarm: Assigned to the outputs after the last filter.
- Mains powered: 110 or 220 VAC with a built-in 24VAC supply.
- Mounting bracket: Supplied with the controller.
- Technical Specifications
Specifiche
- Model
- 31NBCAC4
- Outputs
- 4, 24VAC solenoids
- Power Source
- 110 VAC 60 Hz or 220 VAC 50 Hz, built-in 24VAC supply
- Power Supply Fuse
- 2 A
- Optional Outputs
- Main / pressure sustaining valve, delay valve, alarm
- Operating Temperature
- 32-140°F (0-60°C)
- Dimensions
- 9-1/2 in H x 5-5/8 in L x 3-1/4 in D
- Weight
- 1.3 lb
- Pressure sustaining valve control
- Main valve with pre-dwell from 5 s to 6 min.
- Optional delay valve and alarm
- Assigned to the outputs after the last filter.
- Mains powered
- 110 or 220 VAC with a built-in 24VAC supply.
- Mounting bracket
- Supplied with the controller.
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
Yield Lab Heat Mat Thermostat Temperature Controller
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.