Questo contenuto è attualmente disponibile nella sua lingua originale.
Netafim 16mm Insert Barb Tee - 100 Pack
Modello / SKU: 32500-011330
Laying out drip on a bench or a row bed means splitting lines, and the tee is the fitting that does it.
- Size
- 16 mm
- Fitting Type
- Barb tee, barb x barb x barb
- Dripline Inside Diameter
- 14.2 mm
- Dripline Wall Thickness
- 0.9 to 1.2 mm
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
Laying out drip on a bench or a row bed means splitting lines, and the tee is the fitting that does it.
Product details
- Netafim 16mm Insert Barb Tee
- This one has three barbed ports in a T shape, all sized for 16 mm dripline.
- Water coming in one side carries straight through and also turns out the branch.
- That lets one feed line serve two beds, or a lateral start partway along a header.
- Netafim lists this tee for 16 mm dripline with an inside diameter of 14.2 mm.
- Its catalog fits it to heavy wall tubing with walls from 0.9 to 1.2 mm.
- Each barb grips the inside of the tube, so no clamps or glue are needed.
- The body is a UV and chemical resistant polymer that holds up to sun and fertilizer in the water.
- It is a single molded piece, so there are no joints inside the fitting to leak.
- Netafim's catalog number for this 100 bag is 32500-011330.
- One bag covers a large layout with tees to spare.
- Keeping spares on hand also makes it simple to add a bed later.
- Branching 16mm Dripline Without Leaks
- Plan the layout first so each tee lands where a branch is needed.
- Turn the water off and cut the run line square at the tee position.
- Push the two cut ends onto the straight-through ports of the tee.
- Then push the branch line onto the side port.
- Seat each tube fully over its barb so the joint does not pull off under pressure.
- A slight twist while pushing helps stiff tubing slide on.
- Warm cold tubing in the sun for a few minutes to soften it.
- Add up the emitter flow on both sides of the tee to check the feed line can carry it.
- Very long branches lose pressure toward the end, so keep runs within the dripline maker's length tables.
- Turn the zone on and check every port for drips at full pressure.
- Flush both legs with their ends open before closing them off.
- Mark tee positions on the layout plan so they are easy to find for future repairs.
- Three Barbed Ports: Splits one 16 mm line into two runs.
- Push-On Fit: No clamps, glue or tools.
- Heavy Wall Fit: For 14.2 mm ID dripline, 0.9 to 1.2 mm wall.
Specifiche
- Fitting Type
- Barb tee, barb x barb x barb
- Size
- 16 mm
- Dripline Inside Diameter
- 14.2 mm
- Dripline Wall Thickness
- 0.9 to 1.2 mm
- Material
- UV and chemical resistant polymer
- Pack Quantity
- 100
- Three Barbed Ports
- Splits one 16 mm line into two runs.
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
Yield Lab 600W HPS+MH Cool Tube Hood Reflector Grow Light Kit
Yield Lab 600W HPS+MH Air Cool Tube Reflector Digital Grow Light Kit
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.