Un modo più luminoso per crescere. Vendita all'ingrosso direttamente dalla fabbrica. Oltre 15 anni di esperienza in continua crescita

Questo contenuto è attualmente disponibile nella sua lingua originale.

Propagazione e cura delle pianteRichiesta all'ingrosso

Growlink SI Pulse Module

Modello / SKU: BMT-F-SI4 BACnet MS/TP

4-Channel BACnet MS/TP Pulse Counter Module for Flow Meters

Inputs
4 × S0 pulse, DIN EN 62053-31 Class A
Supply voltage
24 V AC/DC
Mounting
TH35 DIN rail (IEC 60715)
Configuration
2 front rotary switches (address + bit rate)
Prezzo di riferimento della fonteEUR 221.97

Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.

Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.

Assistenza diretta dalla fabbricaOltre 15 anni di esperienza
UNO SGUARDO PIÙ ATTENTO

Qualche informazione in più su questo prodotto

4-Channel BACnet MS/TP Pulse Counter Module for Flow Meters

Product details

  • The BMT-F-SI4 carries four S0 inputs that meet DIN EN 62053-31 Class A.
  • BACnet MS/TP reports the rolling count back to the Growlink controller.
  • The software converts pulses to gallons per minute, then trims pump runtime to land the exact injection volume each dose calls for.
  • BACnet MS/TP S0 Input with Retentive Counters and 500 Hz Capture
  • Pulse capture runs at 50 Hz through the Accumulator object and 500 Hz through the PulseConverter object.
  • A high-pulse flow meter on a fast-cycling pump stays accurate.
  • Retentive memory holds the last counter reading through a power blip.
  • That matters when a recipe spans a UPS swap or breaker trip.
  • Address and bit rate set with two rotary switches on the front.
  • A new module drops onto an existing trunk without bringing the BACnet line up on a laptop.
  • 4 × S0 pulse inputs (DIN EN 62053-31 Class A): Plug any S0-output flow or energy meter into the module.
  • BACnet MS/TP over a single trunk: Reports counter values back to the Growlink controller and any other BACnet client without protocol gateways.
  • 50 Hz Accumulator / 500 Hz PulseConverter: Two BACnet objects cover slow utility meters and fast injection-pump feedback on the same module.
  • Retentive counter memory: Saves the last reading on power loss, so the recipe picks up the correct gallons after a panel cycle.
  • 2 front-panel rotary switches: Set BACnet address and bit rate without a laptop or DIP-switch acrobatics.
  • 24 V AC/DC supply with spring-clamp terminals: Pairs with the same low-voltage bus that runs the rest of the BMT-F I/O lineup.
  • TH35 DIN rail mount: IEC 60715 rail snap-in keeps panels tidy alongside BMT-F-TO4, BMT-F-AOP4, or BMT-F-RTR.
  • Technical Specifications

Specifiche

Inputs
4 × S0 pulse, DIN EN 62053-31 Class A
Supply voltage
24 V AC/DC
Mounting
TH35 DIN rail (IEC 60715)
Configuration
2 front rotary switches (address + bit rate)
Retentive counter memory
Saves the last reading on power loss, so the recipe picks up the correct gallons after a panel cycle.

Facciamo in modo che funzioni per il tuo progetto

Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.

Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.

CRESCIAMO INSIEME

Domande e discussione

0

Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.

CONTINUA A ESPLORARE

Maggiori possibilità per il tuo spazio

Visualizza tutti i prodotti
L'INIZIO DI QUALCOSA DI BUONO

Diamo vita al tuo progetto.

Descrivici brevemente le tue esigenze. Utilizzeremo i tuoi dati per preparare un'offerta all'ingrosso personalizzata.

Il tuo elenco prodotti

Nessun compenso. Nessun obbligo. Solo una conversazione utile.