Questo contenuto è attualmente disponibile nella sua lingua originale.
Growlink Batch TankLINK EC Sensor
Modello / SKU: GL-LINK-ECSENSOR
Reading Conductivity with the Growlink Batch TankLINK EC Sensor
- EC Range
- 0–7,000 µS
- Temperature Compensation
- Built-in PT1000 element in cable
- Cable Length
- 10 ft (3 m); 30 ft available separately
- Calibration
- Single-point @ 1413 µS via LCD wizard
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
Reading Conductivity with the Growlink Batch TankLINK EC Sensor
Product details
- The Growlink Batch TankLINK EC Sensor measures nutrient solution conductivity inside a batch tank in real time.
- The probe reads across a 0–7,000 µS range.
- Accuracy is ±20 µS below 2,000 µS and ±50 µS above that.
- Resolution is 2 µS — roughly 0.02 mS/cm in PPM-meter terms.
- A 10-foot cable runs from the probe to the Batch TankLINK controller's labeled screw terminal block.
- The cable also carries a PT1000 element that gives the controller automatic temperature compensation on every reading.
- Calibration is a single-point process at 1413 µS.
- Drop the probe into calibration solution alongside the temperature probe to lock in the cal pass.
- Wiring the TankLINK EC Probe into a Recirculation Loop
- Most batch-tank installs run a separate probe per recirculation loop.
- The 10-foot cable covers tanks within reach of the controller.
- The 30-foot option (available separately) handles longer runs where the controller mounts wall-side and the tank sits across the room.
- Pair the data with the TankLINK's automated dosing and refill triggers and the nutrient solution EC sensor holds the line to setpoint between batches.
- PT1000-compensated readings also mean morning EC checks match afternoon checks even when the room runs 8°F warmer under lights.
- Plug-and-play wiring keeps a single-probe swap during teardown to a few minutes.
- No driver shuffling — just the batch tank conductivity probe back into the terminal block and a fresh 1413 µS recalibrate.
- Most rooms swap the probe at the start of each season or when calibration drift crosses ±50 µS at the cal point.
- 0–7,000 µS Range: Covers the full PPM band growers feed across veg, transition, and bloom in one probe.
- Tiered Accuracy: ±20 µS below 2,000 µS and ±50 µS above — tight enough to catch real EC drift between feeds.
- Built-In PT1000 Compensation: The cable carries a temperature element so readings stay honest across an 8°F lights-on swing.
- 10 ft Cable Standard: Reaches most controller-to-tank layouts; a 30 ft version is available separately for longer runs.
- Single-Point Calibration: One 1413 µS solution and the LCD wizard handle the full cal — no two-point dance required.
- Technical Specifications
Specifiche
- EC Range
- 0–7,000 µS
- Temperature Compensation
- Built-in PT1000 element in cable
- Cable Length
- 10 ft (3 m); 30 ft available separately
- Calibration
- Single-point @ 1413 µS via LCD wizard
- Connection
- Screw terminal block on Batch TankLINK transmitter
- Compatible Controller
- Growlink Batch TankLINK
- Single-Point Calibration
- One 1413 µS solution and the LCD wizard handle the full cal — no two-point dance required.
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
Yield Lab Heat Mat Thermostat Temperature Controller
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.