Questo contenuto è attualmente disponibile nella sua lingua originale.
Growlink 4 Triac Out Module
Modello / SKU: BMT-F-TO4 BACnet MS/TP
4-Channel Triac Output Module for Fast-Cycling Dosing Loads
- Supply voltage
- 24 V AC/DC
- Outputs
- 4 × solid-state triac
- Mounting
- TH35 DIN rail (IEC 60715)
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
4-Channel Triac Output Module for Fast-Cycling Dosing Loads
Product details
- The BMT-F-TO4 carries four solid-state triac outputs rated 0.8 A each at 24 V AC/DC.
- Where a DO-4 relay would burn out chasing the rapid pulses an HE Anderson injection pump asks for, the triac switches stay clean.
- The pump fires rhythmically at the injection rate the dosing recipe calls for, and BACnet MS/TP carries the setpoints from the Growlink controller.
- BACnet MS/TP Triac Module with Manual Override on Every Channel
- Each output gets a three-position black toggle.
- Setting A lets Growlink software command the channel.
- Setting 1 forces the triac on.
- Setting 0 locks it off.
- The module clips to a TH35 DIN rail and lands the BACnet line on spring-clamp terminals, so commissioning takes minutes per panel.
- Wire it next to a BMT-F-DI4 or BMT-F-AOP4 for a full BACnet I/O stack on the same trunk.
- 4 triac outputs at 0.8 A: Solid-state switching for fast-cycling AC loads like HE Anderson dosing pumps and small solenoid valves.
- BACnet MS/TP communication: Plugs into the Growlink controller and any other BACnet trunk without protocol gateways.
- Manual A/1/0 toggle per channel: Switch from software control to forced on or forced off without rewiring the panel.
- 24 V AC/DC supply: Pairs with the same low-voltage bus that runs the rest of the BMT-F I/O lineup.
- TH35 DIN rail mount: Spring-clamp terminals snap into IEC 60715 rail for clean panel build-outs.
- No mechanical relays to wear out: Triac switching handles the rapid pulse trains a relay would burn out on inside a season.
- Stackable with BMT-F-DI4 / BMT-F-AOP4 / BMT-F-RTR: Build a full BACnet MS/TP I/O bank on one trunk with the Metz Connect family.
- Technical Specifications
Specifiche
- Outputs
- 4 × solid-state triac
- Supply voltage
- 24 V AC/DC
- Mounting
- TH35 DIN rail (IEC 60715)
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
‘Wood Lovr’ Organic Hardwood-Based Sterile Mushroom Substrate
‘Boomr Bag’ Manure-Based Sterile Mushroom Bulk Substrate
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.