Questo contenuto è attualmente disponibile nella sua lingua originale.
Bluelab pH PenPlus, Waterproof with Replaceable Probe
Modello / SKU: PENPLUSPH
Precision pH, now with a replaceable probe
- Bluelab Probe Care Kit (pH)
- Extra calibration sachets, KCl solution, and cleaning tools for ongoing maintenance
- Bluelab pH ProbePlus
- Replacement probe to keep on hand, so a worn probe never means downtime
- Product type
- pH/TDS Meters
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
Precision pH, now with a replaceable probe
Product details
- The Bluelab pH PenPlus reads pH from 0.0 to 14.0 at 0.1 resolution and shows solution temperature in °C or °F on the same backlit screen.
- It ships with pH 4.0, pH 7.0, and KCl storage solution so you can calibrate and start measuring the same day.
- Single-junction probes clog fast in nutrient solutions
- Drift out of calibration within days
- Probe wears out and the whole pen goes in the trash
- No calibration reminder, so you forget and run on bad data
- Dim, unlit screens that are hard to read in a grow room
- Double-junction probe resists contamination from nutrients
- 2-point calibration (pH 4.0 and 7.0) holds accuracy to ±0.1 pH
- Screw-cap replaceable probe: swap the probe, keep the pen
- 30-day calibration reminder built into the firmware
- IP68 dustproof and waterproof, built for daily reservoir use
- pH 4.0, pH 7.0, and KCl storage solution included in the box
- Double-junction pH probe ±0.1 pH
- Two reference junctions instead of one.
- The outer junction takes the beating from nutrient salts so the inner junction stays clean, which means stable readings for longer before the probe wears out.
- Replaceable pH/temperature probe
- The probe unscrews from the pen body.
- When it eventually wears out, screw on a Bluelab pH ProbePlus, recalibrate, and you are back to fresh-probe performance in minutes without buying a whole new meter.
- IP68 dustproof and waterproof
- Rated IP68 for dust and water, so humid grow rooms, wet hands, and the occasional slip into the reservoir are all part of a normal day.
- It also reads solution temperature (0 to 50°C / 32 to 122°F) in your choice of °C or °F.
- Backlit LCD with hold function
- The screen lights up for reading in dim grow rooms.
- Press the hold button to lock the display so you can pull the pen out and read at eye level.
- 30-day calibration reminder
- A built-in timer tracks the days since your last calibration and alerts you when it is time to recalibrate.
- No guessing, no forgetting.
- Hydrating cap and auto-off
Specifiche
- Bluelab Probe Care Kit (pH)
- Extra calibration sachets, KCl solution, and cleaning tools for ongoing maintenance
- Bluelab pH ProbePlus
- Replacement probe to keep on hand, so a worn probe never means downtime
- Product type
- pH/TDS Meters
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
Yield Lab Heat Mat Thermostat Temperature Controller
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.