Questo contenuto è attualmente disponibile nella sua lingua originale.
Apache Tech LED - White/Red 3:2 - AT200
Modello / SKU: AT200
Apache Tech AT200 Build, Draw and Optics
- Spectrum
- White/Red 3:2
- Input
- 120–240V AC; 2.1A at 110V
- Coverage
- 3 x 3 ft (9 sq ft)
- Dimensions
- 13.5 x 11.0 x 5.0 in
Solo a scopo comparativo. Richiedete il vostro prezzo all'ingrosso aggiornato, la disponibilità e le condizioni di consegna.
Nessun pagamento richiesto. Una conversazione per capire di cosa hai bisogno.
Qualche informazione in più su questo prodotto
Apache Tech AT200 Build, Draw and Optics
Product details
- The AT200 is the larger step up in Apache Tech's lineup, using higher-output chips than the smaller 120-series panels.
- It carries 120 x 3W diodes and draws 226W actual, about 2.1A at 110V.
- Input is 120–240V AC, so it runs from a normal household outlet.
- The diodes are split roughly three white to two red, a 3:2 blend that reads as warm white light.
- That keeps the canopy easy to scout, while the red share supports flowering.
- Acrylic lenses direct the light at either 14° or 50°, depending on the version you choose.
- The body measures 13.5 x 11.0 x 5.0 in and weighs about 14.1 lb.
- Cooling comes from thick finned aluminum heat sinks backed by fans.
- Coverage is 3 x 3 ft, the footprint a single 600W HID lamp usually lights.
- How Growers Run an Apache Tech LED Panel Like This
- This is the Apache Tech LED model sized for a full tent.
- Hang it between eighteen and thirty inches above the tops, starting high over young plants.
- Drop it gradually through veg, and watch the upper leaves for bleaching or cupping.
- The narrow lens pushes light deeper into tall plants, while the wide lens suits trained, flat canopies.
- It works as the only light in a small tent or as a supplement beside an older HID fixture.
- Swapping an HID for it cuts heat noticeably, which often lets a small tent drop an exhaust speed.
- A common question is whether it can cover a 4x4 on a light rail.
- A mover spreads the footprint, but the corners will still run dimmer than a fixture sized for that tent.
- The fans are a small trade-off against a fully passive board, since they add a little noise and a part that can wear.
- 120 high-output 3W chips: Dense chip count concentrates output under a compact panel.
- 3:2 white-to-red spectrum: White keeps the canopy easy to read while red supports bloom.
- 14° or 50° acrylic lenses: Pick deep penetration for tall plants or wide spread for flat canopies.
- Finned heatsink with fans: Keeps the housing cool enough to hang close in a small tent.
- Household current draw: About two amps on a standard outlet leaves room for fans and filters.
- Technical Specifications
Specifiche
- Model
- AT200
- Spectrum
- White/Red 3:2
- Input
- 120–240V AC; 2.1A at 110V
- Coverage
- 3 x 3 ft (9 sq ft)
- Hang Height
- 18–30 in above plants
- Dimensions
- 13.5 x 11.0 x 5.0 in
- Weight
- 14.1 lb
- Rated Lifespan
- 50,000 hours
- Certifications
- CE, RoHS, UL
- Finned heatsink with fans
- Keeps the housing cool enough to hang close in a small tent.
- Household current draw
- About two amps on a standard outlet leaves room for fans and filters.
Facciamo in modo che funzioni per il tuo progetto
Nella tua richiesta, specifica la quantità, l'indirizzo di consegna, la zona di coltivazione e qualsiasi esigenza relativa a voltaggio o spina. Specifiche, disponibilità, spedizione e termini di garanzia saranno confermati nel preventivo scritto.
Conversione di riferimento utilizzando il tasso di cambio salvato datato 15 nov 2026. Gli importi convertiti non costituiscono un preventivo.
Maggiori possibilità per il tuo spazio
‘Wood Lovr’ Organic Hardwood-Based Sterile Mushroom Substrate
‘Boomr Bag’ Manure-Based Sterile Mushroom Bulk Substrate
Domande e discussione
Hai una domanda o qualcosa di utile da condividere? Avvia la conversazione.