Ce contenu est actuellement disponible dans sa langue d'origine.
TrolMaster Sensor Bracket (2-pack)
Modèle / UGS: TSB-1
How the TrolMaster TSB-1 Holds a Sensor
- Package size
- 85 x 68 x 67 mm
- Model
- TSB-1
- Contents
- 2 holders (mounts 1 sensor)
- Compatible sensors
- MBS-K30, MBS-PRO
À titre indicatif seulement. Veuillez nous contacter pour connaître nos tarifs de gros actuels, la disponibilité des produits et les conditions de livraison.
Aucun paiement requis. Une simple discussion pour comprendre vos besoins.
Un peu plus d'informations sur ce produit
How the TrolMaster TSB-1 Holds a Sensor
Product details
- This set contains two holders that work together to mount one sensor.
- TrolMaster shaped them specifically for the MBS-K30 and MBS-PRO sensor bodies.
- Curved edges wrap around the sensor and lock it in place, so it cannot slide or twist.
- Each holder fixes flat to a wall or post.
- Holders also join to one another with a mortise-and-tenon joint when a longer mount is needed.
- The low profile keeps the sensor tidy against the wall rather than hanging loose on its cable.
- That matters because a swinging sensor reads the air in a different spot from one minute to the next.
- The brackets are rated for the same 32 to 122 °F and 90% humidity range as the sensors they carry.
- The pack ships in a box about 85 x 68 x 67 mm.
- Placing a Sensor Mounting Bracket for Accurate Readings
- A sensor mounting bracket only helps if it sits in the right place, so plan the position before drilling.
- TrolMaster recommends hanging temperature, humidity and CO2 sensors at canopy height.
- The MBS-K30 CO2 sensor used with Carbon-X belongs lower, at the bottom of the canopy.
- Pick a spot with normal room airflow, away from the direct blast of a fan or humidifier.
- Keep the sensor out of direct light from fixtures, which can heat the housing and skew readings.
- Mark the holes with the sensor in the brackets, then fix the brackets with screws suited to the wall.
- Seat the sensor and route its cable along the wall so it does not pull on the housing.
- Move the brackets up as the crop grows, keeping the sensor in step with the canopy.
- In larger rooms, a set for each sensor keeps every reading consistent.
- Wipe dust off the sensor during routine cleaning.
- Fitted this way, the brackets turn a dangling sensor into a fixed, reliable data point.
- Custom fit: Shaped for MBS-K30 and MBS-PRO sensors.
- Two holders per pack: Together they mount one sensor.
- Curved locking edges: Hold the sensor firmly in place.
- Joinable design: Holders link with a mortise-and-tenon joint.
- Technical Specifications
Caractéristiques
- Model
- TSB-1
- Contents
- 2 holders (mounts 1 sensor)
- Compatible sensors
- MBS-K30, MBS-PRO
- Mounting
- Wall mount, joinable holders
- Package size
- 85 x 68 x 67 mm
Faisons en sorte que cela fonctionne pour votre projet.
Veuillez indiquer la quantité, le lieu de livraison, la zone de culture et toute exigence en matière de tension ou de prise dans votre demande. Les spécifications, la disponibilité, les modalités d'expédition et de garantie seront confirmées dans votre devis écrit.
Conversion de référence utilisant le taux de change enregistré à la date 15 nov. 2026. Les montants convertis ne constituent pas une cotation.
Plus de possibilités pour votre espace
Yield Lab Heat Mat Thermostat Temperature Controller
Questions et discussion
Vous avez une question ou quelque chose d'utile à partager ? Lancez la conversation.