Ce contenu est actuellement disponible dans sa langue d'origine.
TrolMaster Replacement and Backup Temp / Humidity / Light Sensor
Modèle / UGS: MBS-TH
TrolMaster MBS-TH 3-in-1 Sensor for Hydro-X Replacement Builds
- Package Size
- 160 x 86 x 86 mm
- Model
- MBS-TH
- Compatibility
- TrolMaster Hydro-X (HCS-1) — NOT Hydro-X Pro or Plus
- Connector
- RJ12 with included 16 ft cable and T-splitter
À titre indicatif seulement. Veuillez nous contacter pour connaître nos tarifs de gros actuels, la disponibilité des produits et les conditions de livraison.
Aucun paiement requis. Une simple discussion pour comprendre vos besoins.
Un peu plus d'informations sur ce produit
TrolMaster MBS-TH 3-in-1 Sensor for Hydro-X Replacement Builds
Product details
- The MBS-TH is the original 3-in-1 sensor that ships with TrolMaster's Hydro-X (HCS-1) controller.
- Temperature, relative humidity, and ambient light read from one plug-and-play probe.
- Growers keep this as a backup or after a sensor takes a splash.
- A Hydro-X room with a dead probe locks out feeding and lighting routines until it is replaced.
- Comes with a 16 ft RJ12 cable and a T-splitter so a single Hydro-X can run two sensor zones from one input.
- Replacement Workflow and Hydro-X Compatibility
- Plug-and-play to the original Hydro-X (HCS-1).
- Unplug the dead probe, plug this in, the controller picks it up.
- Built-in photocell drives day/night transitions, so light schedules stay in sync with what the room sees.
- Growers typically mount the probe at canopy height in the center of the room.
- One important compatibility note.
- This is the original 3-in-1, not the Hydro-X Pro/Plus 4-in-1.
- Use the MBS-Pro 4-in-1 for an HCS-2 or HCS-3 controller instead.
- Sensor function: 3-in-1 temperature, relative humidity, ambient light in one probe
- Day/night photocell: Built-in light sensor switches the controller's day/night state without a wall clock
- Cable: 16 ft RJ12 with T-splitter — covers a typical 4x8 or 5x10 room from a single Hydro-X
- Output: 0-11.5V signal, max 0.2A draw — does not need an external power adapter
- Operating range: 32-122 F, up to 90% RH — covers a normal indoor grow envelope
- Technical Specifications
Caractéristiques
- Model
- MBS-TH
- Compatibility
- TrolMaster Hydro-X (HCS-1) — NOT Hydro-X Pro or Plus
- Connector
- RJ12 with included 16 ft cable and T-splitter
- Output
- 0-11.5V signal, max 0.2A
- Package Size
- 160 x 86 x 86 mm
Faisons en sorte que cela fonctionne pour votre projet.
Veuillez indiquer la quantité, le lieu de livraison, la zone de culture et toute exigence en matière de tension ou de prise dans votre demande. Les spécifications, la disponibilité, les modalités d'expédition et de garantie seront confirmées dans votre devis écrit.
Conversion de référence utilisant le taux de change enregistré à la date 15 nov. 2026. Les montants convertis ne constituent pas une cotation.
Plus de possibilités pour votre espace
Yield Lab Heat Mat Thermostat Temperature Controller
Questions et discussion
Vous avez une question ou quelque chose d'utile à partager ? Lancez la conversation.