Une façon plus prometteuse de se développer. Vente en gros directe d'usine. Plus de 15 ans d'expertise croissante

Ce contenu est actuellement disponible dans sa langue d'origine.

Propagation et entretien des plantesDemande de renseignements en gros

Trolmaster 1.5 Digital Flow Meter

Modèle / UGS: DFM-3

This meter installs inline on a 1.5 in water or nutrient main.

Pipe size
1.5 in
Package size
255 x 135 x 80 mm
Model
DFM-3
Flow range
1.32 to 39.62 GPM (5 to 150 L/min)
Prix ​​de référence sourceEUR 99.41

À titre indicatif seulement. Veuillez nous contacter pour connaître nos tarifs de gros actuels, la disponibilité des produits et les conditions de livraison.

Aucun paiement requis. Une simple discussion pour comprendre vos besoins.

Assistance directe du fabricantPlus de 15 ans d'expérience
UN REGARD PLUS ATTENTIF

Un peu plus d'informations sur ce produit

This meter installs inline on a 1.5 in water or nutrient main.

Product details

  • What the TrolMaster DFM-3 Reads
  • It covers flows from 1.32 to 39.62 GPM (5 to 150 L/min).
  • A 1 in LCD on the body shows the live flow rate and the running total at the pipe.
  • The data also travels over a 16 ft RJ12 cable to the Aqua-X Pro.
  • It connects to the controller directly or through an SPH-1 RJ12 splitter hub.
  • With the Aqua-X Pro Feed by Volume function, every irrigation cycle stops at a set volume.
  • The body uses BSP threads, with two BSP-to-NPT adaptors fitted at the factory.
  • It is rated to 250 psi and works from 32 to 122 °F.
  • The meter carries CE, FCC and ETL marks and weighs about 1.37 lb packed.
  • Placing a 1.5 Inch Flow Meter on a Main Line
  • A 1.5 inch flow meter belongs where a large pump feeds a whole room or several zones.
  • Install it downstream of the pump and filter, before the line branches to the zone valves.
  • Orient it with the direction of flow and support heavy pipe on both sides of the meter.
  • Use PTFE tape on the NPT adaptors and tighten without forcing the fittings.
  • Keep the LCD facing the walkway so readings can be checked on every round.
  • Run the RJ12 cable to the Aqua-X Pro or an SPH-1 hub, away from wet areas.
  • Enter each zone's target volume and confirm the first totals with a measured fill.
  • A total that climbs on an unchanged program points to a leak worth chasing.
  • A total that falls often means filters or drippers need attention.
  • Flush the pipework before installation so debris does not catch inside the meter.
  • Installed with care, it keeps large rooms on a consistent, measurable feed.
  • 1.32 to 39.62 GPM range: Sized for 1.5 in irrigation mains.
  • On-board LCD: Live flow rate and total volume at the pipe.
  • Feed by Volume: Aqua-X Pro doses each cycle by gallons.
  • Technical Specifications

Caractéristiques

Model
DFM-3
Pipe size
1.5 in
Flow range
1.32 to 39.62 GPM (5 to 150 L/min)
Output
Flow rate and total volume
Compatible controller
Aqua-X Pro (direct or via SPH-1 hub)
Certifications
CE, FCC, ETL
Package size
255 x 135 x 80 mm
Gross weight
1.37 lb
Feed by Volume
Aqua-X Pro doses each cycle by gallons.

Faisons en sorte que cela fonctionne pour votre projet.

Veuillez indiquer la quantité, le lieu de livraison, la zone de culture et toute exigence en matière de tension ou de prise dans votre demande. Les spécifications, la disponibilité, les modalités d'expédition et de garantie seront confirmées dans votre devis écrit.

Conversion de référence utilisant le taux de change enregistré à la date 15 nov. 2026. Les montants convertis ne constituent pas une cotation.

GRANDISSONS ENSEMBLE

Questions et discussion

0

Vous avez une question ou quelque chose d'utile à partager ? Lancez la conversation.

CONTINUEZ À EXPLORER

Plus de possibilités pour votre espace

Voir tous les produits
LE DÉBUT DE QUELQUE CHOSE DE BIEN

Mettons votre projet en lumière.

Parlez-nous un peu de vos besoins. Ces informations nous permettront de vous proposer une offre de vente en gros adaptée.

Votre liste de produits

Aucun paiement. Aucun engagement. Juste une conversation utile.