Une façon plus prometteuse de se développer. Vente en gros directe d'usine. Plus de 15 ans d'expertise croissante

Ce contenu est actuellement disponible dans sa langue d'origine.

Propagation et entretien des plantesDemande de renseignements en gros

ThunderVak Replacement Blades

Modèle / UGS: 777877

ThunderVak Replacement Blades for the Composter Plus Leaf Trimmer

Type
Replacement cutting wires
Material
Nylon
Prix ​​de référence sourceEUR 7.84

À titre indicatif seulement. Veuillez nous contacter pour connaître nos tarifs de gros actuels, la disponibilité des produits et les conditions de livraison.

Aucun paiement requis. Une simple discussion pour comprendre vos besoins.

Assistance directe du fabricantPlus de 15 ans d'expérience
UN REGARD PLUS ATTENTIF

Un peu plus d'informations sur ce produit

ThunderVak Replacement Blades for the Composter Plus Leaf Trimmer

Product details

  • The ThunderVak trims with spinning nylon cords rather than steel knives, and these are the cords it uses.
  • Each wire is a length of round blue nylon with a crimped metal grommet on one end.
  • The grommet seats in the cutting spool on top of the base motor, so the wire stays put at full speed.
  • Fanned out around the spool, the wires sweep just under the aluminum grill.
  • Leaf that hangs through the grill gets clipped while the flower rides above it.
  • The machine runs 8 cutting wires at a time.
  • Nylon cuts cleanly without needing to be sharpened, and a worn wire is swapped for a fresh one.
  • Round blue wires are one of the two styles the trimmer accepts, alongside the octagonal red set.
  • Growers keep a spare set on the shelf so a nicked or shortened cord never stops a harvest.
  • The wires fit the ThunderVak Composter Plus leaf trimmer.
  • As a wear part, a fresh set is the quickest fix for an uneven cut.
  • Swapping Nylon Cutting Wires Between Batches
  • Turn both motors off and unplug the trimmer before touching the cutting area.
  • Lift off the upper reservoir and the grill to expose the spool.
  • Look over every wire for frayed ends, flat spots or missing length.
  • Slide a damaged wire out of its hole in the spool and throw it away.
  • Push a new wire in until its metal grommet seats firmly.
  • Repeat around the spool so the full set is fresh and even.
  • Matching lengths keep the cut level and the motor running smoothly.
  • Set the grill back on and make sure it sits flat on the motor support.
  • The trimming height is preset at the factory, so no adjustment is usually needed after a swap.
  • Run a small handful of material first to confirm the finish looks right.
  • Clean the cutting area after each session with a mild natural cleaner and a damp cloth.
  • Skip abrasive pads, which scratch the surfaces around the spool.
  • Store spare wires flat in a dry bag so they stay straight.
  • Checking the set before every run keeps the trim consistent from first batch to last.
  • Nylon Cutting Cord: Round blue nylon trims leaf cleanly and never needs sharpening.
  • Metal Grommet End: A crimped fitting locks each wire into the cutting spool at speed.

Caractéristiques

Type
Replacement cutting wires
Material
Nylon

Faisons en sorte que cela fonctionne pour votre projet.

Veuillez indiquer la quantité, le lieu de livraison, la zone de culture et toute exigence en matière de tension ou de prise dans votre demande. Les spécifications, la disponibilité, les modalités d'expédition et de garantie seront confirmées dans votre devis écrit.

Conversion de référence utilisant le taux de change enregistré à la date 15 nov. 2026. Les montants convertis ne constituent pas une cotation.

GRANDISSONS ENSEMBLE

Questions et discussion

0

Vous avez une question ou quelque chose d'utile à partager ? Lancez la conversation.

CONTINUEZ À EXPLORER

Plus de possibilités pour votre espace

Voir tous les produits
LE DÉBUT DE QUELQUE CHOSE DE BIEN

Mettons votre projet en lumière.

Parlez-nous un peu de vos besoins. Ces informations nous permettront de vous proposer une offre de vente en gros adaptée.

Votre liste de produits

Aucun paiement. Aucun engagement. Juste une conversation utile.