Ce contenu est actuellement disponible dans sa langue d'origine.
ThinkGrow 12'Daisy chain control cable
Modèle / UGS: ECS-7
ThinkGrow ECS-7 12 ft Daisy Chain Control Cable for LMA-T Bridges
- Model
- ECS-7
- Length
- 12 ft (3.66 m)
- Connector
- RJ12 to 4-pin IP65 threaded waterproof
- Compatible Fixtures
- ThinkGrow Model-I, Model-I Plus, Model-H, Model-H Plus, Model-V, Model-W
À titre indicatif seulement. Veuillez nous contacter pour connaître nos tarifs de gros actuels, la disponibilité des produits et les conditions de livraison.
Aucun paiement requis. Une simple discussion pour comprendre vos besoins.
Un peu plus d'informations sur ce produit
ThinkGrow ECS-7 12 ft Daisy Chain Control Cable for LMA-T Bridges
Product details
- ThinkGrow's ECS-7 is the 12 ft (3.66 m) low-voltage control cable.
- It bridges a TrolMaster LMA-T lighting adapter to ThinkGrow's Model-I, Model-H, Model-V, and Model-W LED fixtures.
- RJ12 on the controller side, a 4-pin IP65 threaded waterproof connector on the fixture side.
- Daisy-chain pass-through at every fixture lets a single controller line sync dim levels across an entire room.
- Where the ECS-7 Sits in a TrolMaster Daisy Chain
- Standard layout: Hydro-X controller into LMA-T adapter into ECS-7 to first fixture into ECS-7 fixture-to-fixture down the row.
- Growers typically place the LMA-T near the controller and run the ECS-7 along the same ceiling truss as the power cords.
- The IP65 fixture connector matters when the room runs evaporative cooling or any supplemental humidity.
- Water on a non-sealed signal connector eventually corrodes pins and trips intermittent dimming bugs that look like driver failures.
- Signal cable only, not power.
- Cable length: 12 ft (3.66 m), enough to bridge LMA-T to first fixture or fixture-to-fixture in a typical row
- Connectors: RJ12 controller-side, 4-pin IP65 threaded waterproof fixture-side
- Function: Daisy-chain control signal — syncs dim levels and schedules across the run
- Compatible fixtures: ThinkGrow Model-I, Model-I Plus, Model-H, Model-H Plus, Model-V, Model-W
- Bridge requirement: Pairs with TrolMaster LMA-T adapter on the Hydro-X / Hydro-X Pro side
- Technical Specifications
Caractéristiques
- Model
- ECS-7
- Length
- 12 ft (3.66 m)
- Connector
- RJ12 to 4-pin IP65 threaded waterproof
- Compatible Fixtures
- ThinkGrow Model-I, Model-I Plus, Model-H, Model-H Plus, Model-V, Model-W
- Standard layout
- Hydro-X controller into LMA-T adapter into ECS-7 to first fixture into ECS-7 fixture-to-fixture down the row.
- Cable length
- 12 ft (3.66 m), enough to bridge LMA-T to first fixture or fixture-to-fixture in a typical row
- Connectors
- RJ12 controller-side, 4-pin IP65 threaded waterproof fixture-side
- Compatible fixtures
- ThinkGrow Model-I, Model-I Plus, Model-H, Model-H Plus, Model-V, Model-W
Faisons en sorte que cela fonctionne pour votre projet.
Veuillez indiquer la quantité, le lieu de livraison, la zone de culture et toute exigence en matière de tension ou de prise dans votre demande. Les spécifications, la disponibilité, les modalités d'expédition et de garantie seront confirmées dans votre devis écrit.
Conversion de référence utilisant le taux de change enregistré à la date 15 nov. 2026. Les montants convertis ne constituent pas une cotation.
Plus de possibilités pour votre espace
Yield Lab Professional Series Double Ended Grow Light Reflector
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
Questions et discussion
Vous avez une question ou quelque chose d'utile à partager ? Lancez la conversation.