Ce contenu est actuellement disponible dans sa langue d'origine.
Sero Bus Cable, 6 ft
Modèle / UGS: 705145
Sero 6 ft Bus Cable for Cabinet and Rack Runs
- Type
- System bus cable
- Length
- 6 ft
- Compatibility
- Sero System
À titre indicatif seulement. Veuillez nous contacter pour connaître nos tarifs de gros actuels, la disponibilité des produits et les conditions de livraison.
Aucun paiement requis. Une simple discussion pour comprendre vos besoins.
Un peu plus d'informations sur ce produit
Sero 6 ft Bus Cable for Cabinet and Rack Runs
Product details
- Some components cannot share the same board as the controller.
- A module might mount on the far side of a cabinet, under a bench or one level up a rack.
- This Sero cable reaches those spots at 6 feet long.
- It has enough length to follow a corner or drop down a rack without stretching.
- The cable carries the system bus from one component to the next.
- That keeps every unit in the same network, even when they are spread out.
- Sero states that only its approved bus cables should connect system components.
- Sticking with the matched cable keeps the connection within the system design.
- Each cable links a single pair of units.
- Measure along the route the cable will follow, including any bends.
- A length that runs slightly long is easier to manage than one that ends short.
- Running a Data Cable Neatly Through a Cabinet
- Cut power to the system before working on any connection.
- Plan the path along the inside walls of the cabinet or rack.
- Secure the cable with clips or soft ties at regular spacing.
- Leave a gentle loop at each end so the connector carries no weight.
- Coil any spare length loosely and fasten it out of the way.
- Avoid tight bends, which can stress the conductors inside.
- Keep the run clear of fans, moving doors and drawer slides.
- Separate it from power cords and lighting wiring where space allows.
- Label each end to match the component it serves.
- Bring power back on and confirm that every unit shows up on the controller.
- Recheck the clips and loops during routine maintenance.
- 6 ft Length: Spans cabinets, benches and racks.
- Follows Corners: Room to route around obstacles.
- Sero Approved: Matched to Sero System components.
- Keeps One Network: Links spread-out units together.
- One Link per Gap: Connects one unit to the next.
Caractéristiques
- Type
- System bus cable
- Length
- 6 ft
- Compatibility
- Sero System
Faisons en sorte que cela fonctionne pour votre projet.
Veuillez indiquer la quantité, le lieu de livraison, la zone de culture et toute exigence en matière de tension ou de prise dans votre demande. Les spécifications, la disponibilité, les modalités d'expédition et de garantie seront confirmées dans votre devis écrit.
Conversion de référence utilisant le taux de change enregistré à la date 15 nov. 2026. Les montants convertis ne constituent pas une cotation.
Plus de possibilités pour votre espace
Yield Lab Professional Series Double Ended Grow Light Reflector
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
Questions et discussion
Vous avez une question ou quelque chose d'utile à partager ? Lancez la conversation.