Une façon plus prometteuse de se développer. Vente en gros directe d'usine. Plus de 15 ans d'expertise croissante

Ce contenu est actuellement disponible dans sa langue d'origine.

Contrôleurs et compteursDemande de renseignements en gros

Sensorex TDS Sensor

Modèle / UGS: CS150TC-K-1.0-P1K-10-BNC-TL

Reading EC with the Growlink Sensorex CS150 TDS Sensor

SIZE
10' Cable, 30' Cable
Sensor Type
Contacting conductivity / TDS, graphite electrodes
Probe Diameter
12 mm
Temperature Element
PT1000 (Automatic Temperature Compensation)
Prix ​​de référence sourceEUR 180.29

À titre indicatif seulement. Veuillez nous contacter pour connaître nos tarifs de gros actuels, la disponibilité des produits et les conditions de livraison.

Aucun paiement requis. Une simple discussion pour comprendre vos besoins.

Assistance directe du fabricantPlus de 15 ans d'expérience
UN REGARD PLUS ATTENTIF

Un peu plus d'informations sur ce produit

Reading EC with the Growlink Sensorex CS150 TDS Sensor

Product details

  • The Growlink Sensorex CS150 TDS Sensor reads conductivity and total dissolved solids on a 12 mm graphite contacting probe rated for lab and light-industrial use.
  • The cell constant is K=1.0, which covers the standard hydroponic feed range.
  • A built-in PT1000 temperature element feeds Automatic Temperature Compensation back through the same cable.
  • EC reads stay honest across reservoir temperature swings.
  • Terminations include a BNC connector for instrumentation and tinned leads for transmitter wiring.
  • The body is plastic with graphite measuring surfaces.
  • Operating range is 0–70°C / 32–158°F.
  • Tank or In-Line Mounting and Sensorex CX-Series Wiring
  • The probe handles two install paths.
  • Drop it into a tank for submerged reads.
  • The in-line option uses an FC50P or FC75P gland and nut fitting through a tee, sized for ½″ and ¾″ NPT pipes.
  • The lab cable variant talks to the Sensorex CM1000 meter.
  • The 10ft and 30ft process cables wire into Sensorex CX-series transmitters such as the CX105, CX2000, CX2000RS, and CX3100.
  • Pick the cable length that matches the run from probe to transmitter.
  • Clean the graphite surface with gentle detergent or 5% HCl in a small cup between batches.
  • The Sensorex CS150 conductivity sensor holds calibration through the cleaning cycle.
  • Most rooms work through two probes a season once a graphite element has logged enough hours in high-EC drainback.
  • Pair this graphite EC/TDS sensor with a Sensorex transmitter for continuous logging through the run.
  • Keep a spare on the shelf for swap-day during summer drainback peaks.
  • A spare cuts downtime when a probe needs cleaning mid-bloom.
  • 12 mm Graphite Contacting Probe: Cost-effective EC/TDS read for lab and light-industrial reservoir or in-line use.
  • K=1.0 Cell Constant: Sized for the standard hydroponic feed range — good resolution from veg through bloom EC values.
  • PT1000 Temperature Element: Automatic Temperature Compensation built into the cable keeps EC readings honest across tank temp swings.
  • BNC + Tinned Lead Terminations: BNC plugs into instrumentation; tinned leads land on Sensorex CX-series transmitter terminals.
  • Tank or In-Line Mounting: Submerge in the reservoir or install in a tee with FC50P (½″ NPT) or FC75P (¾″ NPT) gland fittings.
  • Technical Specifications

Caractéristiques

Sensor Type
Contacting conductivity / TDS, graphite electrodes
Probe Diameter
12 mm
Temperature Element
PT1000 (Automatic Temperature Compensation)
Connector / Termination
BNC + tinned leads (TL)
Cable Length Options
10 ft (3 m) or 30 ft (9 m)
Body Material
Plastic body, graphite measuring surfaces
Mounting
Submersible in tank, or in-line via FC50P (½″ NPT) / FC75P (¾″ NPT)
Compatible Transmitters
Sensorex CX105, CX2000, CX2000RS, CX3100 (process cable); CM1000 (lab cable)
Tank or In-Line Mounting
Submerge in the reservoir or install in a tee with FC50P (½″ NPT) or FC75P (¾″ NPT) gland fittings.
SIZE
10' Cable, 30' Cable

Faisons en sorte que cela fonctionne pour votre projet.

Veuillez indiquer la quantité, le lieu de livraison, la zone de culture et toute exigence en matière de tension ou de prise dans votre demande. Les spécifications, la disponibilité, les modalités d'expédition et de garantie seront confirmées dans votre devis écrit.

Conversion de référence utilisant le taux de change enregistré à la date 15 nov. 2026. Les montants convertis ne constituent pas une cotation.

GRANDISSONS ENSEMBLE

Questions et discussion

0

Vous avez une question ou quelque chose d'utile à partager ? Lancez la conversation.

CONTINUEZ À EXPLORER

Plus de possibilités pour votre espace

Voir tous les produits
LE DÉBUT DE QUELQUE CHOSE DE BIEN

Mettons votre projet en lumière.

Parlez-nous un peu de vos besoins. Ces informations nous permettront de vous proposer une offre de vente en gros adaptée.

Votre liste de produits

Aucun paiement. Aucun engagement. Juste une conversation utile.