Ce contenu est actuellement disponible dans sa langue d'origine.
Ruck 4 Back Draught Dampner
Modèle / UGS: 148389
How the 4 Inch Back Draught Damper Seals an Idle Duct
- Duct Size
- 4 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
À titre indicatif seulement. Veuillez nous contacter pour connaître nos tarifs de gros actuels, la disponibilité des produits et les conditions de livraison.
Aucun paiement requis. Une simple discussion pour comprendre vos besoins.
Un peu plus d'informations sur ce produit
How the 4 Inch Back Draught Damper Seals an Idle Duct
Product details
- This is a one-way gate in the duct.
- Spring-loaded aluminium flaps lift when the fan pushes air and drop shut when it stops, with a rubber seal closing the gap at rest.
- The housing is galvanized sheet steel.
- On a 4 in run it weighs half a pound and adds about 3.5 in of depth.
- Mounting a Backdraft Shutter in the Right Place
- It mounts horizontally or vertically, which is unusual for a gravity damper and comes from the spring rather than relying on weight.
- Fit it downstream of the fan with the flaps opening in the direction of flow.
- Understand the cost: flaps sitting in the airstream take a small bite out of static pressure, and on a small fan that is not nothing.
- Keep the seat clean, because dust on the rubber is what stops a damper closing fully.
- On a small run the flaps are light enough to open at low fan speed without stalling.
- Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
- Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
- Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
- Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
- 4 in Duct Fit: Matches Ruck 4 in components and standard 4 in ducting.
- Fully Mechanical: No wiring, no actuator and no control signal to lose.
- Technical Specifications
Caractéristiques
- Duct Size
- 4 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
Faisons en sorte que cela fonctionne pour votre projet.
Veuillez indiquer la quantité, le lieu de livraison, la zone de culture et toute exigence en matière de tension ou de prise dans votre demande. Les spécifications, la disponibilité, les modalités d'expédition et de garantie seront confirmées dans votre devis écrit.
Conversion de référence utilisant le taux de change enregistré à la date 15 nov. 2026. Les montants convertis ne constituent pas une cotation.
Plus de possibilités pour votre espace
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Questions et discussion
Vous avez une question ou quelque chose d'utile à partager ? Lancez la conversation.