Une façon plus prometteuse de se développer. Vente en gros directe d'usine. Plus de 15 ans d'expertise croissante

Ce contenu est actuellement disponible dans sa langue d'origine.

Ventilation et climatDemande de renseignements en gros

Quest Duct Kit (Hi-E 195)

Modèle / UGS: 4039132

Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs

Compatible models
Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)
Prix ​​de référence sourceEUR 167.61

À titre indicatif seulement. Veuillez nous contacter pour connaître nos tarifs de gros actuels, la disponibilité des produits et les conditions de livraison.

Aucun paiement requis. Une simple discussion pour comprendre vos besoins.

Assistance directe du fabricantPlus de 15 ans d'expérience
UN REGARD PLUS ATTENTIF

Un peu plus d'informations sur ce produit

Quest Hi-E Dry Duct Kit for Ducted Hi-E Dry Installs

Product details

  • This is the factory duct kit for the Quest Hi-E Dry 120 and Hi-E Dry 195 portable dehumidifiers, part number 4039132.
  • A duct cover plate blocks off the opening the ducted setup no longer uses.
  • Foam tape and a foam tape seal close the gaps between collar and cabinet so air goes where the duct sends it.
  • Twelve 6-20 x 3/4 in screws and six 6-20 x 1/2 in screws mount everything to the cabinet.
  • The installation sheet for the kit is TS-1059, written for the Hi-E series.
  • The compatible units are the Hi-E Dry 120, Quest part 4036730, and the Hi-E Dry 195, part 4036710.
  • Nothing else is needed from the dehumidifier side.
  • Flex or rigid duct in matching sizes completes the run.
  • Why Growers Fit a Dehumidifier Duct Kit
  • A ducted dehumidifier can sit outside the canopy, in a hallway, mechanical closet or the plenum above.
  • That keeps its heat and noise out of the room and frees floor space for plants.
  • Dry supply air can then be thrown where airflow is weakest, which helps flatten pockets of high humidity.
  • Keep duct runs short and smooth, since every bend and foot of flex adds static pressure and trims moisture removal.
  • Seal every joint with foil tape so the unit is not pulling air from the attic or a wall cavity.
  • Leave service access to the filter, because a ducted unit is easy to forget once it is out of sight.
  • Plan the drain line at the same time, since a remote unit still needs a path for condensate.
  • The kit carries a warning that a licensed, qualified electrician should do the work, so budget the install accordingly.
  • 10 in Supply Collar: A round collar on the supply side connects standard 10 in duct to deliver dry air.
  • Block-Off Plate: Seals the cabinet opening that a ducted layout no longer uses.
  • Foam Seals and Hardware: Foam tape, foam seal and two sizes of screws make an airtight, secure fit.
  • Fits Hi-E Dry 120 and 195: Made for Quest parts 4036730 and 4036710, the two Hi-E Dry portable units.
  • Technical Specifications

Caractéristiques

Compatible models
Quest Hi-E Dry 120 (4036730), Quest Hi-E Dry 195 (4036710)

Faisons en sorte que cela fonctionne pour votre projet.

Veuillez indiquer la quantité, le lieu de livraison, la zone de culture et toute exigence en matière de tension ou de prise dans votre demande. Les spécifications, la disponibilité, les modalités d'expédition et de garantie seront confirmées dans votre devis écrit.

Conversion de référence utilisant le taux de change enregistré à la date 15 nov. 2026. Les montants convertis ne constituent pas une cotation.

GRANDISSONS ENSEMBLE

Questions et discussion

0

Vous avez une question ou quelque chose d'utile à partager ? Lancez la conversation.

CONTINUEZ À EXPLORER

Plus de possibilités pour votre espace

Voir tous les produits
LE DÉBUT DE QUELQUE CHOSE DE BIEN

Mettons votre projet en lumière.

Parlez-nous un peu de vos besoins. Ces informations nous permettront de vous proposer une offre de vente en gros adaptée.

Votre liste de produits

Aucun paiement. Aucun engagement. Juste une conversation utile.