Ce contenu est actuellement disponible dans sa langue d'origine.
LTL Controls Master 8 - Lighting Relay Controller
Modèle / UGS: 270008
A lighting relay controller for up to eight HID ballasts
- Max Wattage
- 8000W (1000W per outlet)
- Main Voltage
- 120V or 240V
- Type
- HID lighting relay controller
- Max Relay Amperage
- 50 A
À titre indicatif seulement. Veuillez nous contacter pour connaître nos tarifs de gros actuels, la disponibilité des produits et les conditions de livraison.
Aucun paiement requis. Une simple discussion pour comprendre vos besoins.
Un peu plus d'informations sur ce produit
A lighting relay controller for up to eight HID ballasts
Product details
- The Master 8 switches up to eight 1000W HID ballasts, 8000W across eight universal outlets.
- That brings a full bank of lights on and off together.
- It runs on 120V or 240V and carries up to 50 amps through relays rated for at least 100,000 operations at full load.
- Because it is a relay controller, it handles the switching while a separate timer sets the schedule.
- Growers connect the included 120V trigger cable to a standard timing device to run the whole bank on one cycle.
- Wiring and safety on the Master 8
- The universal outlets accept common ballast plugs, and the 50-amp relay leaves headroom for a full eight-lamp bank.
- Because it switches high-amperage mains power, LTL strongly recommends a certified electrician for install if you are not familiar with electrical wiring.
- One note: this is a relay switch, not a dimmer, so it runs lights full-on or off rather than at reduced output.
- Eight HID Outlets: Switches up to eight 1000W ballasts, 8000W total.
- 120V or 240V: Runs on either main voltage through universal outlets.
- 50-Amp Relay: Handles up to 50 amps with headroom for a full bank.
- Timer-Triggered: Includes a 120V trigger cable for any standard timing device.
- Technical Specifications
Caractéristiques
- Type
- HID lighting relay controller
- Max Wattage
- 8000W (1000W per outlet)
- Main Voltage
- 120V or 240V
- Max Relay Amperage
- 50 A
- Operating Humidity
- 0-99% non-condensing
Faisons en sorte que cela fonctionne pour votre projet.
Veuillez indiquer la quantité, le lieu de livraison, la zone de culture et toute exigence en matière de tension ou de prise dans votre demande. Les spécifications, la disponibilité, les modalités d'expédition et de garantie seront confirmées dans votre devis écrit.
Conversion de référence utilisant le taux de change enregistré à la date 15 nov. 2026. Les montants convertis ne constituent pas une cotation.
Plus de possibilités pour votre espace
Yield Lab Heat Mat Thermostat Temperature Controller
Questions et discussion
Vous avez une question ou quelque chose d'utile à partager ? Lancez la conversation.