Ce contenu est actuellement disponible dans sa langue d'origine.
Growlink Climalink
Modèle / UGS: GL-LINK-CLIMATECO2
Growlink ClimaLINK climate sensor for aspirated canopy monitoring
- Dimensions
- 9.25" × 4.375" × 3.75"
- Temperature Range
- -40 to 257°F (-40 to 125°C)
- Temperature Accuracy
- ±0.18°F (±0.1°C)
- Humidity Range
- 0–100% RH
À titre indicatif seulement. Veuillez nous contacter pour connaître nos tarifs de gros actuels, la disponibilité des produits et les conditions de livraison.
Aucun paiement requis. Une simple discussion pour comprendre vos besoins.
Un peu plus d'informations sur ce produit
Growlink ClimaLINK climate sensor for aspirated canopy monitoring
Product details
- The ClimaLINK reads canopy air at -40 to 257°F (-40 to 125°C) ±0.18°F and 0–100% RH ±1.0%, then derives VPD on board so the values that drive transpiration arrive already calculated at the Growlink hub.
- Passive sensors stall in dense canopies.
- The aspirated head pulls a steady stream of air across the probes, which matters when leaf-height microclimates form around the housing and a static sensor ends up reading the dead spot instead of the actual canopy.
- Two configurations for any grow room climate sensor build
- GL-LINK-CLIMATE covers temp, humidity, light, and VPD; GL-LINK_CLIMATECO2 adds an NDIR 0–5000 ppm CO₂ sensor at ±3% accuracy for rooms actively dosing CO₂.
- Both share the same 9.25" × 4.375" × 3.75" housing with sealed filters over the intakes, which matters less in a clean propagation room than in a flowering room where overspray and root-zone dust eventually creep into exposed probes.
- Hang it at leaf height, run the included 5m M8 cable to the hub, and the readings feed the same Growlink OS pipeline that handles irrigation, substrate VWC, and climate setpoints.
- Aspirated Sensor Head: Active airflow across the probes keeps readings honest in dense canopies where passive sensors stall on stale air pockets.
- Built-in VPD Calculation: Vapor pressure deficit arrives pre-computed at the hub, so Growlink OS plots VPD without an extra calculation layer on the dashboard.
- Optional NDIR CO₂ Module: The CLIMATECO2 SKU adds 0–5000 ppm sensing at ±3% accuracy, sized for rooms running active CO₂ enrichment up to typical flowering targets.
- Wide Temperature Range: -40 to 257°F (-40 to 125°C) at ±0.18°F resolution covers propagation cold rooms through greenhouse summer peaks without switching probes.
- Sealed Filter Construction: Filters over each intake keep media dust and irrigation overspray off the sensor element across a full flowering cycle.
- 5m M8 Cable Included: Pre-terminated cable runs from the ClimaLINK to the Growlink hub without a custom harness or field-built connector.
- Growlink OS Integration: Data drops into the same dashboard, logging, and automation rules as Growlink's irrigation and substrate sensors.
- Technical Specifications
Caractéristiques
- Temperature Range
- -40 to 257°F (-40 to 125°C)
- Temperature Accuracy
- ±0.18°F (±0.1°C)
- Humidity Range
- 0–100% RH
- Humidity Accuracy
- ±1.0%
- Light Measurement
- Included
- Dimensions
- 9.25" × 4.375" × 3.75"
- Compatible System
- Growlink OS
- Wide Temperature Range
- -40 to 257°F (-40 to 125°C) at ±0.18°F resolution covers propagation cold rooms through greenhouse summer peaks without switching probes.
- Sealed Filter Construction
- Filters over each intake keep media dust and irrigation overspray off the sensor element across a full flowering cycle.
- Growlink OS Integration
- Data drops into the same dashboard, logging, and automation rules as Growlink's irrigation and substrate sensors.
- Option
- With Co2, No Co2
Faisons en sorte que cela fonctionne pour votre projet.
Veuillez indiquer la quantité, le lieu de livraison, la zone de culture et toute exigence en matière de tension ou de prise dans votre demande. Les spécifications, la disponibilité, les modalités d'expédition et de garantie seront confirmées dans votre devis écrit.
Conversion de référence utilisant le taux de change enregistré à la date 15 nov. 2026. Les montants convertis ne constituent pas une cotation.
Plus de possibilités pour votre espace
‘Wood Lovr’ Organic Hardwood-Based Sterile Mushroom Substrate
‘Boomr Bag’ Manure-Based Sterile Mushroom Bulk Substrate
Questions et discussion
Vous avez une question ou quelque chose d'utile à partager ? Lancez la conversation.