Ce contenu est actuellement disponible dans sa langue d'origine.
GF Flow Meter
Modèle / UGS: 3-2536-P0
Insertion Flow Meter for 1/2 to 4 Inch Pipes
- Pipe size range
- DN15 to DN100 (1/2 in to 4 in)
- Sensor type
- Insertion paddlewheel (GF Signet Rotor-X)
- Flow range
- 0.1 to 6 m/s (0.3 to 20 ft/s)
- Turndown ratio
- 66:1
À titre indicatif seulement. Veuillez nous contacter pour connaître nos tarifs de gros actuels, la disponibilité des produits et les conditions de livraison.
Aucun paiement requis. Une simple discussion pour comprendre vos besoins.
Un peu plus d'informations sur ce produit
Insertion Flow Meter for 1/2 to 4 Inch Pipes
Product details
- The 2536-P0 Rotor-X taps into pipes from DN15 to DN100 — that's 1/2 to 4 inch nominal in standard PVC, CPVC, or carbon-steel schedules.
- The polypropylene body, black PVDF rotor, titanium pin, and FPM O-ring shrug off water, mild acids, and standard fertigation chemistry.
- A wide 0.1 to 6 m/s (0.3 to 20 ft/s) range covers low-flow drip headers up to high-volume mains.
- The 66:1 turndown ratio means one sensor handles morning irrigation and night recirculation on the same line.
- Paddlewheel Flow Sensor with Open-Collector Output for PLC and Growlink
- The open-collector sinking output runs up to 10 mA.
- A Growlink Connect Controller, Precision Irrigation Controller, or any PLC reads the pulses without a signal conditioner.
- Linearity holds at ±1% of max range and repeatability at ±0.5%, both referenced to 25°C.
- The sensor lands in a standard 1.5 in NPT or compatible installation saddle.
- On most live lines, you can hot-tap with the right shutoff valve in place — no system drain.
- 0.1 to 6 m/s flow range (0.3 to 20 ft/s): Single sensor covers drip headers, sub-mains, and high-volume distribution.
- 66:1 turndown ratio: Tracks morning recirculation and afternoon main flow without swapping hardware.
- ±1% linearity, ±0.5% repeatability: Lab-grade accuracy at 25°C, holding through normal greenhouse swings.
- Open-collector sinking output, 10 mA: Reads on any Growlink controller, PLC, or pulse counter without a conditioner.
- PP body, PVDF rotor, titanium pin, FPM O-ring: Chemistry compatible with water, mild acids, and standard fertigation feeds.
- Hot-tap install on live lines: Insertion saddle + isolation valve lets you mount without draining the system.
- Technical Specifications
Caractéristiques
- Sensor type
- Insertion paddlewheel (GF Signet Rotor-X)
- Pipe size range
- DN15 to DN100 (1/2 in to 4 in)
- Flow range
- 0.1 to 6 m/s (0.3 to 20 ft/s)
- Turndown ratio
- 66:1
- Output
- Open-collector sinking, 10 mA max
- Max pressure
- 180 psi @ 68°F (12.4 bar)
- Pressure derating
- 25 psi @ 185°F
- Operating temperature
- 0 to 185°F
Faisons en sorte que cela fonctionne pour votre projet.
Veuillez indiquer la quantité, le lieu de livraison, la zone de culture et toute exigence en matière de tension ou de prise dans votre demande. Les spécifications, la disponibilité, les modalités d'expédition et de garantie seront confirmées dans votre devis écrit.
Conversion de référence utilisant le taux de change enregistré à la date 15 nov. 2026. Les montants convertis ne constituent pas une cotation.
Plus de possibilités pour votre espace
‘Wood Lovr’ Organic Hardwood-Based Sterile Mushroom Substrate
‘Boomr Bag’ Manure-Based Sterile Mushroom Bulk Substrate
Questions et discussion
Vous avez une question ou quelque chose d'utile à partager ? Lancez la conversation.