Ce contenu est actuellement disponible dans sa langue d'origine.
Apache Tech LED - White/Red 3:2 - AT200
Modèle / UGS: AT200
Apache Tech AT200 Build, Draw and Optics
- Spectrum
- White/Red 3:2
- Input
- 120–240V AC; 2.1A at 110V
- Coverage
- 3 x 3 ft (9 sq ft)
- Dimensions
- 13.5 x 11.0 x 5.0 in
À titre indicatif seulement. Veuillez nous contacter pour connaître nos tarifs de gros actuels, la disponibilité des produits et les conditions de livraison.
Aucun paiement requis. Une simple discussion pour comprendre vos besoins.
Un peu plus d'informations sur ce produit
Apache Tech AT200 Build, Draw and Optics
Product details
- The AT200 is the larger step up in Apache Tech's lineup, using higher-output chips than the smaller 120-series panels.
- It carries 120 x 3W diodes and draws 226W actual, about 2.1A at 110V.
- Input is 120–240V AC, so it runs from a normal household outlet.
- The diodes are split roughly three white to two red, a 3:2 blend that reads as warm white light.
- That keeps the canopy easy to scout, while the red share supports flowering.
- Acrylic lenses direct the light at either 14° or 50°, depending on the version you choose.
- The body measures 13.5 x 11.0 x 5.0 in and weighs about 14.1 lb.
- Cooling comes from thick finned aluminum heat sinks backed by fans.
- Coverage is 3 x 3 ft, the footprint a single 600W HID lamp usually lights.
- How Growers Run an Apache Tech LED Panel Like This
- This is the Apache Tech LED model sized for a full tent.
- Hang it between eighteen and thirty inches above the tops, starting high over young plants.
- Drop it gradually through veg, and watch the upper leaves for bleaching or cupping.
- The narrow lens pushes light deeper into tall plants, while the wide lens suits trained, flat canopies.
- It works as the only light in a small tent or as a supplement beside an older HID fixture.
- Swapping an HID for it cuts heat noticeably, which often lets a small tent drop an exhaust speed.
- A common question is whether it can cover a 4x4 on a light rail.
- A mover spreads the footprint, but the corners will still run dimmer than a fixture sized for that tent.
- The fans are a small trade-off against a fully passive board, since they add a little noise and a part that can wear.
- 120 high-output 3W chips: Dense chip count concentrates output under a compact panel.
- 3:2 white-to-red spectrum: White keeps the canopy easy to read while red supports bloom.
- 14° or 50° acrylic lenses: Pick deep penetration for tall plants or wide spread for flat canopies.
- Finned heatsink with fans: Keeps the housing cool enough to hang close in a small tent.
- Household current draw: About two amps on a standard outlet leaves room for fans and filters.
- Technical Specifications
Caractéristiques
- Model
- AT200
- Spectrum
- White/Red 3:2
- Input
- 120–240V AC; 2.1A at 110V
- Coverage
- 3 x 3 ft (9 sq ft)
- Hang Height
- 18–30 in above plants
- Dimensions
- 13.5 x 11.0 x 5.0 in
- Weight
- 14.1 lb
- Rated Lifespan
- 50,000 hours
- Certifications
- CE, RoHS, UL
- Finned heatsink with fans
- Keeps the housing cool enough to hang close in a small tent.
- Household current draw
- About two amps on a standard outlet leaves room for fans and filters.
Faisons en sorte que cela fonctionne pour votre projet.
Veuillez indiquer la quantité, le lieu de livraison, la zone de culture et toute exigence en matière de tension ou de prise dans votre demande. Les spécifications, la disponibilité, les modalités d'expédition et de garantie seront confirmées dans votre devis écrit.
Conversion de référence utilisant le taux de change enregistré à la date 15 nov. 2026. Les montants convertis ne constituent pas une cotation.
Plus de possibilités pour votre espace
‘Wood Lovr’ Organic Hardwood-Based Sterile Mushroom Substrate
‘Boomr Bag’ Manure-Based Sterile Mushroom Bulk Substrate
Questions et discussion
Vous avez une question ou quelque chose d'utile à partager ? Lancez la conversation.