Ce contenu est actuellement disponible dans sa langue d'origine.
8 inch Backdraft Damper
Modèle / UGS: VTBDD8
Where an 8 inch Backdraft Damper Earns Its Place
- Duct size
- Eight inches, which covers most single room extraction runs
- Duct diameter
- 8 in
- Type
- Round backdraft damper, duct insert
- Material
- Galvanized steel
À titre indicatif seulement. Veuillez nous contacter pour connaître nos tarifs de gros actuels, la disponibilité des produits et les conditions de livraison.
Aucun paiement requis. Une simple discussion pour comprendre vos besoins.
Un peu plus d'informations sur ce produit
Where an 8 inch Backdraft Damper Earns Its Place
Product details
- Eight inches is where a lot of single room extraction ends up.
- It is also the size where backflow starts costing money rather than merely being a nuisance.
- A duct this diameter moves a serious volume in either direction.
- With the fan off, an eight inch open run will let cold air, smell and roof dust travel back into a room all night.
- Sealed rooms lose their pressure relationship the same way.
- This damper stops that with two galvanized blades hung on independent hinges.
- Independence is the part to look for in any damper, because a shared shaft turns one stuck blade into two.
- The whole assembly inserts into the duct, so there is no flange, no adaptor and no transition piece.
- It installs in any orientation, which matters on a vertical riser as much as on a horizontal run.
- The Neoprene Gasket and What a Bad Seal Costs
- The blades close onto a neoprene perimeter gasket rather than onto bare steel.
- That choice does two jobs at once.
- It takes the clang out of a closure, which is a real consideration in a building where people sleep or work nearby.
- It also fills the gap that a metal edge always leaves.
- On a duct this size a thin gap around the circumference adds up to a meaningful leak.
- Keep the gasket in mind through the life of the installation.
- Dust builds on the sealing face, resin from a room carries into the duct, and a face that cannot seat cleanly leaks quietly for months.
- Wipe it when the filter is serviced.
- Atmosphere quote an opening requirement of four to eight hundredths of an inch of static pressure.
- Any reasonably specified eight inch fan exceeds that at full speed.
- Check it at the lowest speed the fan will actually be run, not at full.
- Duct size: Eight inches, which covers most single room extraction runs
- Function: Prevents backflow of cold air, odour and dust when the fan stops
- Blades: Two galvanized blades, each on an independent hinge
- Seal: Neoprene perimeter gasket, not a bare metal edge
- Noise: The gasket takes the clang out of every closure
- Leakage: A gasketed face closes the gap a metal edge always leaves
- Mounting: The assembly inserts into the duct with no flange needed
Caractéristiques
- Duct diameter
- 8 in
- Type
- Round backdraft damper, duct insert
- Material
- Galvanized steel
- Mounting
- The whole assembly inserts into the duct
- Opening pressure
- 0.04 to 0.08 in of static pressure
- Duct size
- Eight inches, which covers most single room extraction runs
- Noise
- The gasket takes the clang out of every closure
Faisons en sorte que cela fonctionne pour votre projet.
Veuillez indiquer la quantité, le lieu de livraison, la zone de culture et toute exigence en matière de tension ou de prise dans votre demande. Les spécifications, la disponibilité, les modalités d'expédition et de garantie seront confirmées dans votre devis écrit.
Conversion de référence utilisant le taux de change enregistré à la date 15 nov. 2026. Les montants convertis ne constituent pas une cotation.
Plus de possibilités pour votre espace
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Questions et discussion
Vous avez une question ou quelque chose d'utile à partager ? Lancez la conversation.