Este contenido está disponible actualmente en su idioma original.
TrolMaster Replacement and Backup Temp / Humidity / Light Sensor
Modelo / SKU: MBS-TH
TrolMaster MBS-TH 3-in-1 Sensor for Hydro-X Replacement Builds
- Package Size
- 160 x 86 x 86 mm
- Model
- MBS-TH
- Compatibility
- TrolMaster Hydro-X (HCS-1) — NOT Hydro-X Pro or Plus
- Connector
- RJ12 with included 16 ft cable and T-splitter
Solo a título informativo. Solicite su precio mayorista actual, disponibilidad y condiciones de entrega.
No se requiere ningún pago. Una conversación sobre lo que necesitas.
Un poco más sobre este producto
TrolMaster MBS-TH 3-in-1 Sensor for Hydro-X Replacement Builds
Product details
- The MBS-TH is the original 3-in-1 sensor that ships with TrolMaster's Hydro-X (HCS-1) controller.
- Temperature, relative humidity, and ambient light read from one plug-and-play probe.
- Growers keep this as a backup or after a sensor takes a splash.
- A Hydro-X room with a dead probe locks out feeding and lighting routines until it is replaced.
- Comes with a 16 ft RJ12 cable and a T-splitter so a single Hydro-X can run two sensor zones from one input.
- Replacement Workflow and Hydro-X Compatibility
- Plug-and-play to the original Hydro-X (HCS-1).
- Unplug the dead probe, plug this in, the controller picks it up.
- Built-in photocell drives day/night transitions, so light schedules stay in sync with what the room sees.
- Growers typically mount the probe at canopy height in the center of the room.
- One important compatibility note.
- This is the original 3-in-1, not the Hydro-X Pro/Plus 4-in-1.
- Use the MBS-Pro 4-in-1 for an HCS-2 or HCS-3 controller instead.
- Sensor function: 3-in-1 temperature, relative humidity, ambient light in one probe
- Day/night photocell: Built-in light sensor switches the controller's day/night state without a wall clock
- Cable: 16 ft RJ12 with T-splitter — covers a typical 4x8 or 5x10 room from a single Hydro-X
- Output: 0-11.5V signal, max 0.2A draw — does not need an external power adapter
- Operating range: 32-122 F, up to 90% RH — covers a normal indoor grow envelope
- Technical Specifications
Presupuesto
- Model
- MBS-TH
- Compatibility
- TrolMaster Hydro-X (HCS-1) — NOT Hydro-X Pro or Plus
- Connector
- RJ12 with included 16 ft cable and T-splitter
- Output
- 0-11.5V signal, max 0.2A
- Package Size
- 160 x 86 x 86 mm
Hagamos que funcione para tu proyecto.
En su consulta, incluya la cantidad, el destino de entrega, la zona de cultivo y cualquier requisito de voltaje o enchufe. Las especificaciones, la disponibilidad, el envío y las condiciones de garantía se confirmarán en su presupuesto por escrito.
Conversión de referencia utilizando el tipo de cambio guardado con fecha 15 nov 2026. Los importes convertidos no constituyen una cotización.
Más posibilidades para tu espacio
Yield Lab Heat Mat Thermostat Temperature Controller
Yield Lab Duct Fan Motor Speed Controller
Preguntas y debate
¿Tienes alguna pregunta o algo útil que compartir? Inicia la conversación.