Una forma más brillante de crecer. Venta al por mayor directamente de fábrica. Más de 15 años de experiencia en constante crecimiento.

Este contenido está disponible actualmente en su idioma original.

Trolmaster 1.5 Digital Flow Meter

Modelo / SKU: DFM-3

This meter installs inline on a 1.5 in water or nutrient main.

Pipe size
1.5 in
Package size
255 x 135 x 80 mm
Model
DFM-3
Flow range
1.32 to 39.62 GPM (5 to 150 L/min)
Precio de referencia de la fuenteEUR 99.41

Solo a título informativo. Solicite su precio mayorista actual, disponibilidad y condiciones de entrega.

No se requiere ningún pago. Una conversación sobre lo que necesitas.

Soporte directo de fábricaMás de 15 años de experiencia
UNA MIRADA MÁS DETALLADA

Un poco más sobre este producto

This meter installs inline on a 1.5 in water or nutrient main.

Product details

  • What the TrolMaster DFM-3 Reads
  • It covers flows from 1.32 to 39.62 GPM (5 to 150 L/min).
  • A 1 in LCD on the body shows the live flow rate and the running total at the pipe.
  • The data also travels over a 16 ft RJ12 cable to the Aqua-X Pro.
  • It connects to the controller directly or through an SPH-1 RJ12 splitter hub.
  • With the Aqua-X Pro Feed by Volume function, every irrigation cycle stops at a set volume.
  • The body uses BSP threads, with two BSP-to-NPT adaptors fitted at the factory.
  • It is rated to 250 psi and works from 32 to 122 °F.
  • The meter carries CE, FCC and ETL marks and weighs about 1.37 lb packed.
  • Placing a 1.5 Inch Flow Meter on a Main Line
  • A 1.5 inch flow meter belongs where a large pump feeds a whole room or several zones.
  • Install it downstream of the pump and filter, before the line branches to the zone valves.
  • Orient it with the direction of flow and support heavy pipe on both sides of the meter.
  • Use PTFE tape on the NPT adaptors and tighten without forcing the fittings.
  • Keep the LCD facing the walkway so readings can be checked on every round.
  • Run the RJ12 cable to the Aqua-X Pro or an SPH-1 hub, away from wet areas.
  • Enter each zone's target volume and confirm the first totals with a measured fill.
  • A total that climbs on an unchanged program points to a leak worth chasing.
  • A total that falls often means filters or drippers need attention.
  • Flush the pipework before installation so debris does not catch inside the meter.
  • Installed with care, it keeps large rooms on a consistent, measurable feed.
  • 1.32 to 39.62 GPM range: Sized for 1.5 in irrigation mains.
  • On-board LCD: Live flow rate and total volume at the pipe.
  • Feed by Volume: Aqua-X Pro doses each cycle by gallons.
  • Technical Specifications

Presupuesto

Model
DFM-3
Pipe size
1.5 in
Flow range
1.32 to 39.62 GPM (5 to 150 L/min)
Output
Flow rate and total volume
Compatible controller
Aqua-X Pro (direct or via SPH-1 hub)
Certifications
CE, FCC, ETL
Package size
255 x 135 x 80 mm
Gross weight
1.37 lb
Feed by Volume
Aqua-X Pro doses each cycle by gallons.

Hagamos que funcione para tu proyecto.

En su consulta, incluya la cantidad, el destino de entrega, la zona de cultivo y cualquier requisito de voltaje o enchufe. Las especificaciones, la disponibilidad, el envío y las condiciones de garantía se confirmarán en su presupuesto por escrito.

Conversión de referencia utilizando el tipo de cambio guardado con fecha 15 nov 2026. Los importes convertidos no constituyen una cotización.

CREZCAMOS JUNTOS

Preguntas y debate

0

¿Tienes alguna pregunta o algo útil que compartir? Inicia la conversación.

SIGUE EXPLORANDO

Más posibilidades para tu espacio

Ver todos los productos
EL COMIENZO DE ALGO BUENO

Vamos a sacar tu proyecto a la luz.

Cuéntenos brevemente qué necesita. Utilizaremos sus datos para preparar una respuesta mayorista adecuada.

Lista de productos

Sin pago. Sin compromiso. Simplemente una conversación útil.