Este contenido está disponible actualmente en su idioma original.
Accesorios de iluminaciónConsulta mayorista
Sero Bus Cable, 10 ft
Modelo / SKU: 705150
Sero 10 ft Bus Cable for Room-Side Components
- Type
- System bus cable
- Length
- 10 ft
- Compatibility
- Sero System
Precio de referencia de la fuenteEUR 15.50
Solo a título informativo. Solicite su precio mayorista actual, disponibilidad y condiciones de entrega.
No se requiere ningún pago. Una conversación sobre lo que necesitas.
Soporte directo de fábricaMás de 15 años de experiencia
UNA MIRADA MÁS DETALLADA
Un poco más sobre este producto
Sero 10 ft Bus Cable for Room-Side Components
Product details
- In many grow rooms the controller hangs by the door while the gear it manages sits deeper inside.
- A module near a bench or on the next wall needs a longer link.
- This Sero cable spans that distance at 10 feet.
- It carries the system bus from the controller or one module to the next unit.
- That lets the controller stay where it is easy to read and reach.
- The components can then sit close to the equipment they work with.
- Sero states that only its approved bus cables should connect system components.
- A matched cable keeps the bus connection within the system design.
- Each cable joins one component to one other.
- Map the route along walls or ceiling supports before choosing a length.
- Include any rise or drop along the way in that measurement.
- Laying Out a Sero Controller Network in a Room
- Turn off power to the system before plugging in or unplugging any bus cable.
- Run the cable high along walls or supports, away from foot traffic and spills.
- Fasten it with clips or soft ties at regular spacing.
- Leave a small slack loop near each connector so tension stays off the plug.
- Keep it clear of lights, ballasts and heaters.
- Cross power wiring at right angles rather than running alongside it.
- Protect the cable with conduit or a cover where it crosses a doorway or walkway.
- Label both ends so each module can be traced quickly.
- Restore power and confirm the controller recognizes every connected unit.
- Walk the run during regular maintenance and look for chafing or loose ties.
- Replace any cable with a cut jacket or damaged connector.
- 10 ft Length: Reaches across part of a room.
- Flexible Layout: Controller stays near the door.
- Sero Approved: Matched to Sero System components.
- One Link per Gap: Connects one unit to the next.
- Clean Routing: Runs along walls and supports.
Presupuesto
- Type
- System bus cable
- Length
- 10 ft
- Compatibility
- Sero System
Hagamos que funcione para tu proyecto.
En su consulta, incluya la cantidad, el destino de entrega, la zona de cultivo y cualquier requisito de voltaje o enchufe. Las especificaciones, la disponibilidad, el envío y las condiciones de garantía se confirmarán en su presupuesto por escrito.
Conversión de referencia utilizando el tipo de cambio guardado con fecha 15 nov 2026. Los importes convertidos no constituyen una cotización.
SIGUE EXPLORANDO
Ver todos los productosMás posibilidades para tu espacio
Accesorios de iluminación
Yield Lab Professional Series Double Ended Grow Light Reflector
Referencia de la fuenteEUR 58.83
Accesorios de iluminación
Yield Lab Professional Series 120/220v 630w Dual Bulb CMH Open Wing Reflector/Ballast
Referencia de la fuenteEUR 270.89
Accesorios de iluminación
Yield Lab Pro Series 120/220V 1000W Double Ended Complete Grow Light Kit
Referencia de la fuenteEUR 135.85
Accesorios de iluminación
Yield Lab LED Grow Room Glasses with Case
Referencia de la fuenteEUR 18.07
Preguntas y debate
¿Tienes alguna pregunta o algo útil que compartir? Inicia la conversación.