Una forma más brillante de crecer. Venta al por mayor directamente de fábrica. Más de 15 años de experiencia en constante crecimiento.

Este contenido está disponible actualmente en su idioma original.

Ventilación y climaConsulta mayorista

Ruck 8 Back Draught Dampner

Modelo / SKU: 149394

How the 8 Inch Back Draught Damper Seals an Idle Duct

Duct Size
8 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.
Precio de referencia de la fuenteEUR 20.84

Solo a título informativo. Solicite su precio mayorista actual, disponibilidad y condiciones de entrega.

No se requiere ningún pago. Una conversación sobre lo que necesitas.

Soporte directo de fábricaMás de 15 años de experiencia
UNA MIRADA MÁS DETALLADA

Un poco más sobre este producto

How the 8 Inch Back Draught Damper Seals an Idle Duct

Product details

  • Galvanized sheet steel housing, spring-loaded aluminium flaps, rubber seal at the seat.
  • The flaps are held closed by spring pressure and opened by the fan, which means there is nothing to wire and nothing to fail electrically.
  • On an 8 in duct it is the simplest way to stop reverse flow through an idle run.
  • Mounting a Backdraft Shutter in the Right Place
  • Because the flaps are sprung rather than gravity-hung, it works mounted horizontally or vertically.
  • Put it downstream of the fan with the flaps opening the way the air goes.
  • The honest cost is a small static pressure penalty, which on an 8 in run is usually irrelevant but is real.
  • Check the rubber seat for dust when you service the fan; that is what makes a damper leak.
  • If the flaps chatter at low speed, the fan is running below the pressure they need to stay open.
  • Nudge the speed up a step.
  • Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
  • Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
  • Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
  • Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
  • 8 in Duct Fit: Matches Ruck 8 in components and standard 8 in ducting.
  • Fully Mechanical: No wiring, no actuator and no control signal to lose.
  • Technical Specifications

Presupuesto

Duct Size
8 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.

Hagamos que funcione para tu proyecto.

En su consulta, incluya la cantidad, el destino de entrega, la zona de cultivo y cualquier requisito de voltaje o enchufe. Las especificaciones, la disponibilidad, el envío y las condiciones de garantía se confirmarán en su presupuesto por escrito.

Conversión de referencia utilizando el tipo de cambio guardado con fecha 15 nov 2026. Los importes convertidos no constituyen una cotización.

CREZCAMOS JUNTOS

Preguntas y debate

0

¿Tienes alguna pregunta o algo útil que compartir? Inicia la conversación.

SIGUE EXPLORANDO

Más posibilidades para tu espacio

Ver todos los productos
EL COMIENZO DE ALGO BUENO

Vamos a sacar tu proyecto a la luz.

Cuéntenos brevemente qué necesita. Utilizaremos sus datos para preparar una respuesta mayorista adecuada.

Lista de productos

Sin pago. Sin compromiso. Simplemente una conversación útil.