Una forma más brillante de crecer. Venta al por mayor directamente de fábrica. Más de 15 años de experiencia en constante crecimiento.

Este contenido está disponible actualmente en su idioma original.

Ventilación y climaConsulta mayorista

Ruck 4 Back Draught Dampner

Modelo / SKU: 148389

How the 4 Inch Back Draught Damper Seals an Idle Duct

Duct Size
4 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.
Precio de referencia de la fuenteEUR 16.31

Solo a título informativo. Solicite su precio mayorista actual, disponibilidad y condiciones de entrega.

No se requiere ningún pago. Una conversación sobre lo que necesitas.

Soporte directo de fábricaMás de 15 años de experiencia
UNA MIRADA MÁS DETALLADA

Un poco más sobre este producto

How the 4 Inch Back Draught Damper Seals an Idle Duct

Product details

  • This is a one-way gate in the duct.
  • Spring-loaded aluminium flaps lift when the fan pushes air and drop shut when it stops, with a rubber seal closing the gap at rest.
  • The housing is galvanized sheet steel.
  • On a 4 in run it weighs half a pound and adds about 3.5 in of depth.
  • Mounting a Backdraft Shutter in the Right Place
  • It mounts horizontally or vertically, which is unusual for a gravity damper and comes from the spring rather than relying on weight.
  • Fit it downstream of the fan with the flaps opening in the direction of flow.
  • Understand the cost: flaps sitting in the airstream take a small bite out of static pressure, and on a small fan that is not nothing.
  • Keep the seat clean, because dust on the rubber is what stops a damper closing fully.
  • On a small run the flaps are light enough to open at low fan speed without stalling.
  • Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
  • Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
  • Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
  • Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
  • 4 in Duct Fit: Matches Ruck 4 in components and standard 4 in ducting.
  • Fully Mechanical: No wiring, no actuator and no control signal to lose.
  • Technical Specifications

Presupuesto

Duct Size
4 in
Mounting
Horizontal or vertical
Operation
Airflow-opened, spring-closed
Horizontal or Vertical Mounting
Spring loading means it does not depend on gravity to close.

Hagamos que funcione para tu proyecto.

En su consulta, incluya la cantidad, el destino de entrega, la zona de cultivo y cualquier requisito de voltaje o enchufe. Las especificaciones, la disponibilidad, el envío y las condiciones de garantía se confirmarán en su presupuesto por escrito.

Conversión de referencia utilizando el tipo de cambio guardado con fecha 15 nov 2026. Los importes convertidos no constituyen una cotización.

CREZCAMOS JUNTOS

Preguntas y debate

0

¿Tienes alguna pregunta o algo útil que compartir? Inicia la conversación.

SIGUE EXPLORANDO

Más posibilidades para tu espacio

Ver todos los productos
EL COMIENZO DE ALGO BUENO

Vamos a sacar tu proyecto a la luz.

Cuéntenos brevemente qué necesita. Utilizaremos sus datos para preparar una respuesta mayorista adecuada.

Lista de productos

Sin pago. Sin compromiso. Simplemente una conversación útil.