Este contenido está disponible actualmente en su idioma original.
Ruck 12 Back Draught Dampner
Modelo / SKU: 149477
How the 12 Inch Back Draught Damper Seals an Idle Duct
- Nothing about it is powered
- airflow alone opens it and spring pressure alone closes it.
- Duct Size
- 12 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
Solo a título informativo. Solicite su precio mayorista actual, disponibilidad y condiciones de entrega.
No se requiere ningún pago. Una conversación sobre lo que necesitas.
Un poco más sobre este producto
How the 12 Inch Back Draught Damper Seals an Idle Duct
Product details
- At 12 in the reverse draught through a stopped fan is substantial, and in winter it is expensive.
- The damper blocks it with spring-loaded aluminium flaps seating on a rubber seal, inside a galvanized sheet steel housing.
- Nothing about it is powered: airflow alone opens it and spring pressure alone closes it.
- Mounting a Backdraft Shutter in the Right Place
- Horizontal or vertical mounting both work, thanks to the spring rather than gravity holding the flaps shut.
- Install it after the fan, flaps opening downstream.
- There is a small pressure penalty to accept, and at this size it is a fair trade against the heat a stopped fan otherwise loses.
- Dust on the rubber seat is the usual failure mode, so wipe it when you service the run.
- A flap that rattles at low output means the fan is not making enough pressure to hold it open cleanly.
- Spring-Loaded Aluminium Flaps: Open on airflow and close under spring pressure, with nothing to power.
- Rubber Seal: Closes the gap at the seat so a stopped duct actually stays shut.
- Galvanized Steel Housing: Corrosion-resistant in the damp air an exhaust run carries.
- Horizontal or Vertical Mounting: Spring loading means it does not depend on gravity to close.
- 12 in Duct Fit: Matches Ruck 12 in components and standard 12 in ducting.
- Fully Mechanical: No wiring, no actuator and no control signal to lose.
- Technical Specifications
Presupuesto
- Duct Size
- 12 in
- Mounting
- Horizontal or vertical
- Operation
- Airflow-opened, spring-closed
- Nothing about it is powered
- airflow alone opens it and spring pressure alone closes it.
- Horizontal or Vertical Mounting
- Spring loading means it does not depend on gravity to close.
Hagamos que funcione para tu proyecto.
En su consulta, incluya la cantidad, el destino de entrega, la zona de cultivo y cualquier requisito de voltaje o enchufe. Las especificaciones, la disponibilidad, el envío y las condiciones de garantía se confirmarán en su presupuesto por escrito.
Conversión de referencia utilizando el tipo de cambio guardado con fecha 15 nov 2026. Los importes convertidos no constituyen una cotización.
Más posibilidades para tu espacio
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Preguntas y debate
¿Tienes alguna pregunta o algo útil que compartir? Inicia la conversación.