Este contenido está disponible actualmente en su idioma original.
Ventilación y climaConsulta mayorista
Quest Overhead Dehumidifier Hanging Bracket
Modelo / SKU: 4036668
Quest Overhead Dehumidifier Hanging Bracket
- Compatible models
- Quest Dual 105, 155, 165, 205, 215, 225
- Quantity
- 1 bracket per package
- Fits Six Dual Models
- Dual 105, 155, 165, 205, 215 and 225.
Precio de referencia de la fuenteEUR 35.41
Solo a título informativo. Solicite su precio mayorista actual, disponibilidad y condiciones de entrega.
No se requiere ningún pago. Una conversación sobre lo que necesitas.
Soporte directo de fábricaMás de 15 años de experiencia
UNA MIRADA MÁS DETALLADA
Un poco más sobre este producto
Quest Overhead Dehumidifier Hanging Bracket
Product details
- This is Quest's factory bracket for hanging a Quest Dual dehumidifier overhead instead of setting it on the floor.
- It fits the Dual 105, 155, 165, 205, 215 and 225.
- Each package holds one bracket, and every dehumidifier needs two.
- The brackets fasten to the cabinet with the mounting screws provided.
- Once both are on, the unit hangs from them on chain or threaded rod tied into the ceiling structure.
- Getting a dehumidifier off the floor frees space for benches, walkways and carts.
- It also keeps the cabinet clear of floor-level water, spills and washdowns.
- A hung unit stays out of the way of foot traffic and carts during harvest.
- The part number is 4036668.
- Using the factory bracket keeps the load on the points Quest designed for it.
- Installing a Dehumidifier Hanger Safely
- A dehumidifier hanger only works if the ceiling structure can carry the load.
- Quest Dual units are heavy, so anchor into joists, trusses or strut channel rather than drywall.
- Fit both brackets to the cabinet on the floor, then lift the unit into place with a helper or a lift.
- Use chain or threaded rod rated well above the unit's weight, and keep the hangers vertical.
- Level the cabinet so the condensate drains toward the outlet instead of pooling.
- Plan the drain line or condensate pump before the unit goes up, since access gets harder once it hangs.
- Leave room around the filter door so the filter can still slide out for cleaning.
- Keep the discharge clear of lights and duct runs so dry air reaches the canopy.
- Hang the unit where its cord reaches the outlet without an extension.
- Check the hardware every few months for loosened nuts or stretched links.
- Factory Quest Part: Made for the Quest Dual cabinet and its mounting points.
- Fits Six Dual Models: Dual 105, 155, 165, 205, 215 and 225.
- Two Per Unit: One bracket per package; each dehumidifier uses two.
- Screws Included: Mounting screws attach the bracket to the cabinet.
- Frees Floor Space: Lifts the unit above benches, walkways and floor water.
- Technical Specifications
Presupuesto
- Compatible models
- Quest Dual 105, 155, 165, 205, 215, 225
- Quantity
- 1 bracket per package
- Fits Six Dual Models
- Dual 105, 155, 165, 205, 215 and 225.
Hagamos que funcione para tu proyecto.
En su consulta, incluya la cantidad, el destino de entrega, la zona de cultivo y cualquier requisito de voltaje o enchufe. Las especificaciones, la disponibilidad, el envío y las condiciones de garantía se confirmarán en su presupuesto por escrito.
Conversión de referencia utilizando el tipo de cambio guardado con fecha 15 nov 2026. Los importes convertidos no constituyen una cotización.
SIGUE EXPLORANDO
Ver todos los productosMás posibilidades para tu espacio
Ventilación y clima
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Referencia de la fuenteEUR 135.85
Ventilación y clima
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Referencia de la fuenteEUR 126.79
Ventilación y clima
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Referencia de la fuenteEUR 108.67
Ventilación y clima
Yield Lab 6 Inch 440 CFM Air Duct Fan Vent System
Referencia de la fuenteEUR 172.09
Preguntas y debate
¿Tienes alguna pregunta o algo útil que compartir? Inicia la conversación.