Este contenido está disponible actualmente en su idioma original.
Ventilación y climaConsulta mayorista
Quest 335 Duct Kit
Modelo / SKU: 4042685
What the Quest 335 Duct Kit Includes
- Duct diameter
- 16 in
- Compatible models
- Quest 335 208/230 V (4042500), Quest 335 277 V (4042600), Quest 375 50 Hz (4046200-NC)
- Remote mounting
- Run the unit from a mechanical room or ceiling.
Precio de referencia de la fuenteEUR 385.04
Solo a título informativo. Solicite su precio mayorista actual, disponibilidad y condiciones de entrega.
No se requiere ningún pago. Una conversación sobre lo que necesitas.
Soporte directo de fábricaMás de 15 años de experiencia
UNA MIRADA MÁS DETALLADA
Un poco más sobre este producto
What the Quest 335 Duct Kit Includes
Product details
- This factory accessory converts a Quest 335 from a free-hanging unit into a ducted dehumidifier.
- In the box are an intake duct adapter, a duct adapter face, a duct plenum face and an exhaust duct plenum.
- Ten #10-24 hex-slotted screws and a 1/8 in drill bit come with it for fastening the parts to the cabinet.
- Both connections take 16 in round duct.
- Quest part number 4042685 fits the Quest 335 at 208/230 V (4042500) and at 277 V (4042600).
- It also fits the 50 Hz Quest 375 (4046200-NC).
- The 335 moves 900 CFM at 0.6 in WG with duct collars fitted, so the blower has pressure to spare for a short run.
- That lets the dehumidifier sit in a mechanical room or above a ceiling while dry air still reaches the canopy.
- Planning a Run With a Dehumidifier Duct Kit
- A dehumidifier duct kit makes sense when room space is tight, or when the unit's noise and heat belong somewhere else.
- Give each dehumidifier its own duct system rather than tying it into a fan or HVAC line.
- Keep each run to about 25 ft and as straight as possible, since every elbow adds resistance.
- Rigid pipe on a direct path holds airflow better than flex duct routed around obstacles.
- Drill only within the safe zones shown in the Quest 335 manual so screws stay clear of coils and wiring.
- Aim the discharge across the canopy or into a circulation path so dry air mixes instead of pooling.
- Seal every joint with foil tape to stop the unit pulling in air from the plenum space.
- Leave room to reach the end access panel, because the 22 x 20 x 2 in MERV-13 filter still needs regular changes.
- Installed this way, the 335 keeps its rated capacity while staying out of the growing space.
- 16 in connections: Round duct on both intake and discharge.
- Complete hardware: Adapters, plenum, screws and drill bit included.
- Factory fit: Quest part 4042685 for the Quest 335 cabinet.
- Remote mounting: Run the unit from a mechanical room or ceiling.
- Technical Specifications
Presupuesto
- Duct diameter
- 16 in
- Compatible models
- Quest 335 208/230 V (4042500), Quest 335 277 V (4042600), Quest 375 50 Hz (4046200-NC)
- Remote mounting
- Run the unit from a mechanical room or ceiling.
Hagamos que funcione para tu proyecto.
En su consulta, incluya la cantidad, el destino de entrega, la zona de cultivo y cualquier requisito de voltaje o enchufe. Las especificaciones, la disponibilidad, el envío y las condiciones de garantía se confirmarán en su presupuesto por escrito.
Conversión de referencia utilizando el tipo de cambio guardado con fecha 15 nov 2026. Los importes convertidos no constituyen una cotización.
SIGUE EXPLORANDO
Ver todos los productosMás posibilidades para tu espacio
Ventilación y clima
Yield Lab 6 Inch Purifier Activated Charcoal Filter
Referencia de la fuenteEUR 135.85
Ventilación y clima
Yield Lab 6 inch 440 CFM Duct Inline Fan with 6" Carbon Filter Ducting and Clamps
Referencia de la fuenteEUR 126.79
Ventilación y clima
Yield Lab 6 Inch 440 CFM Charcoal Filter and Duct Fan Combo Kit
Referencia de la fuenteEUR 108.67
Ventilación y clima
Yield Lab 6 Inch 440 CFM Air Duct Fan Vent System
Referencia de la fuenteEUR 172.09
Preguntas y debate
¿Tienes alguna pregunta o algo útil que compartir? Inicia la conversación.