Una forma más brillante de crecer. Venta al por mayor directamente de fábrica. Más de 15 años de experiencia en constante crecimiento.

Este contenido está disponible actualmente en su idioma original.

Hidroponía y riegoConsulta mayorista

Netafim 16mm Insert Barb Tee - 100 Pack

Modelo / SKU: 32500-011330

Laying out drip on a bench or a row bed means splitting lines, and the tee is the fitting that does it.

Size
16 mm
Fitting Type
Barb tee, barb x barb x barb
Dripline Inside Diameter
14.2 mm
Dripline Wall Thickness
0.9 to 1.2 mm
Precio de referencia de la fuenteEUR 67.46

Solo a título informativo. Solicite su precio mayorista actual, disponibilidad y condiciones de entrega.

No se requiere ningún pago. Una conversación sobre lo que necesitas.

Soporte directo de fábricaMás de 15 años de experiencia
UNA MIRADA MÁS DETALLADA

Un poco más sobre este producto

Laying out drip on a bench or a row bed means splitting lines, and the tee is the fitting that does it.

Product details

  • Netafim 16mm Insert Barb Tee
  • This one has three barbed ports in a T shape, all sized for 16 mm dripline.
  • Water coming in one side carries straight through and also turns out the branch.
  • That lets one feed line serve two beds, or a lateral start partway along a header.
  • Netafim lists this tee for 16 mm dripline with an inside diameter of 14.2 mm.
  • Its catalog fits it to heavy wall tubing with walls from 0.9 to 1.2 mm.
  • Each barb grips the inside of the tube, so no clamps or glue are needed.
  • The body is a UV and chemical resistant polymer that holds up to sun and fertilizer in the water.
  • It is a single molded piece, so there are no joints inside the fitting to leak.
  • Netafim's catalog number for this 100 bag is 32500-011330.
  • One bag covers a large layout with tees to spare.
  • Keeping spares on hand also makes it simple to add a bed later.
  • Branching 16mm Dripline Without Leaks
  • Plan the layout first so each tee lands where a branch is needed.
  • Turn the water off and cut the run line square at the tee position.
  • Push the two cut ends onto the straight-through ports of the tee.
  • Then push the branch line onto the side port.
  • Seat each tube fully over its barb so the joint does not pull off under pressure.
  • A slight twist while pushing helps stiff tubing slide on.
  • Warm cold tubing in the sun for a few minutes to soften it.
  • Add up the emitter flow on both sides of the tee to check the feed line can carry it.
  • Very long branches lose pressure toward the end, so keep runs within the dripline maker's length tables.
  • Turn the zone on and check every port for drips at full pressure.
  • Flush both legs with their ends open before closing them off.
  • Mark tee positions on the layout plan so they are easy to find for future repairs.
  • Three Barbed Ports: Splits one 16 mm line into two runs.
  • Push-On Fit: No clamps, glue or tools.
  • Heavy Wall Fit: For 14.2 mm ID dripline, 0.9 to 1.2 mm wall.

Presupuesto

Fitting Type
Barb tee, barb x barb x barb
Size
16 mm
Dripline Inside Diameter
14.2 mm
Dripline Wall Thickness
0.9 to 1.2 mm
Material
UV and chemical resistant polymer
Pack Quantity
100
Three Barbed Ports
Splits one 16 mm line into two runs.

Hagamos que funcione para tu proyecto.

En su consulta, incluya la cantidad, el destino de entrega, la zona de cultivo y cualquier requisito de voltaje o enchufe. Las especificaciones, la disponibilidad, el envío y las condiciones de garantía se confirmarán en su presupuesto por escrito.

Conversión de referencia utilizando el tipo de cambio guardado con fecha 15 nov 2026. Los importes convertidos no constituyen una cotización.

CREZCAMOS JUNTOS

Preguntas y debate

0

¿Tienes alguna pregunta o algo útil que compartir? Inicia la conversación.

SIGUE EXPLORANDO

Más posibilidades para tu espacio

Ver todos los productos
EL COMIENZO DE ALGO BUENO

Vamos a sacar tu proyecto a la luz.

Cuéntenos brevemente qué necesita. Utilizaremos sus datos para preparar una respuesta mayorista adecuada.

Lista de productos

Sin pago. Sin compromiso. Simplemente una conversación útil.