Ein vielversprechenderer Weg zum Wachstum. Großhandel direkt ab Werk. Mehr als 15 Jahre wachsende Expertise

Dieser Inhalt ist derzeit in seiner Originalsprache verfügbar.

Regler und MessgeräteGroßhandelsanfrage

TrolMaster Sensor Bracket (2-pack)

Modell / Artikelnummer: TSB-1

How the TrolMaster TSB-1 Holds a Sensor

Package size
85 x 68 x 67 mm
Model
TSB-1
Contents
2 holders (mounts 1 sensor)
Compatible sensors
MBS-K30, MBS-PRO
QuellenreferenzpreisEUR 14.46

Nur zum Vergleich. Fordern Sie Ihren aktuellen Großhandelspreis, die Verfügbarkeit und die Lieferbedingungen an.

Keine Zahlung erforderlich. Ein Gespräch über Ihre Bedürfnisse.

Direkter WerkssupportMehr als 15 Jahre Erfahrung
EIN GENAUERER BLICK

Noch ein paar weitere Informationen zu diesem Produkt

How the TrolMaster TSB-1 Holds a Sensor

Product details

  • This set contains two holders that work together to mount one sensor.
  • TrolMaster shaped them specifically for the MBS-K30 and MBS-PRO sensor bodies.
  • Curved edges wrap around the sensor and lock it in place, so it cannot slide or twist.
  • Each holder fixes flat to a wall or post.
  • Holders also join to one another with a mortise-and-tenon joint when a longer mount is needed.
  • The low profile keeps the sensor tidy against the wall rather than hanging loose on its cable.
  • That matters because a swinging sensor reads the air in a different spot from one minute to the next.
  • The brackets are rated for the same 32 to 122 °F and 90% humidity range as the sensors they carry.
  • The pack ships in a box about 85 x 68 x 67 mm.
  • Placing a Sensor Mounting Bracket for Accurate Readings
  • A sensor mounting bracket only helps if it sits in the right place, so plan the position before drilling.
  • TrolMaster recommends hanging temperature, humidity and CO2 sensors at canopy height.
  • The MBS-K30 CO2 sensor used with Carbon-X belongs lower, at the bottom of the canopy.
  • Pick a spot with normal room airflow, away from the direct blast of a fan or humidifier.
  • Keep the sensor out of direct light from fixtures, which can heat the housing and skew readings.
  • Mark the holes with the sensor in the brackets, then fix the brackets with screws suited to the wall.
  • Seat the sensor and route its cable along the wall so it does not pull on the housing.
  • Move the brackets up as the crop grows, keeping the sensor in step with the canopy.
  • In larger rooms, a set for each sensor keeps every reading consistent.
  • Wipe dust off the sensor during routine cleaning.
  • Fitted this way, the brackets turn a dangling sensor into a fixed, reliable data point.
  • Custom fit: Shaped for MBS-K30 and MBS-PRO sensors.
  • Two holders per pack: Together they mount one sensor.
  • Curved locking edges: Hold the sensor firmly in place.
  • Joinable design: Holders link with a mortise-and-tenon joint.
  • Technical Specifications

Spezifikationen

Model
TSB-1
Contents
2 holders (mounts 1 sensor)
Compatible sensors
MBS-K30, MBS-PRO
Mounting
Wall mount, joinable holders
Package size
85 x 68 x 67 mm

Lass es uns für dein Projekt zum Laufen bringen

Bitte geben Sie in Ihrer Anfrage die gewünschte Menge, den Lieferort, die Anbaufläche sowie eventuelle Spannungs- oder Steckeranforderungen an. Spezifikationen, Verfügbarkeit, Versand- und Garantiebedingungen werden in Ihrem schriftlichen Angebot bestätigt.

Referenzumrechnung unter Verwendung des gespeicherten Wechselkurses vom 15.11.2026. Die umgerechneten Beträge stellen kein Angebot dar.

LASST UNS GEMEINSAM WACHSEN

Fragen und Diskussion

0

Haben Sie eine Frage oder möchten Sie etwas Nützliches teilen? Starten Sie das Gespräch.

WEITER ERKUNDEN

Mehr Möglichkeiten für Ihren Raum

Alle Produkte ansehen
DER BEGINN VON ETWAS GUTEM

Lass uns dein Projekt ans Licht bringen.

Schildern Sie uns kurz Ihre Anforderungen. Wir nutzen Ihre Angaben, um Ihnen ein passendes Angebot für den Großhandel zu unterbreiten.

Ihre Produktliste

Keine Zahlung. Keine Verpflichtung. Nur ein hilfreiches Gespräch.