Dieser Inhalt ist derzeit in seiner Originalsprache verfügbar.
Trolmaster 1.5 Digital Flow Meter
Modell / Artikelnummer: DFM-3
This meter installs inline on a 1.5 in water or nutrient main.
- Pipe size
- 1.5 in
- Package size
- 255 x 135 x 80 mm
- Model
- DFM-3
- Flow range
- 1.32 to 39.62 GPM (5 to 150 L/min)
Nur zum Vergleich. Fordern Sie Ihren aktuellen Großhandelspreis, die Verfügbarkeit und die Lieferbedingungen an.
Keine Zahlung erforderlich. Ein Gespräch über Ihre Bedürfnisse.
Noch ein paar weitere Informationen zu diesem Produkt
This meter installs inline on a 1.5 in water or nutrient main.
Product details
- What the TrolMaster DFM-3 Reads
- It covers flows from 1.32 to 39.62 GPM (5 to 150 L/min).
- A 1 in LCD on the body shows the live flow rate and the running total at the pipe.
- The data also travels over a 16 ft RJ12 cable to the Aqua-X Pro.
- It connects to the controller directly or through an SPH-1 RJ12 splitter hub.
- With the Aqua-X Pro Feed by Volume function, every irrigation cycle stops at a set volume.
- The body uses BSP threads, with two BSP-to-NPT adaptors fitted at the factory.
- It is rated to 250 psi and works from 32 to 122 °F.
- The meter carries CE, FCC and ETL marks and weighs about 1.37 lb packed.
- Placing a 1.5 Inch Flow Meter on a Main Line
- A 1.5 inch flow meter belongs where a large pump feeds a whole room or several zones.
- Install it downstream of the pump and filter, before the line branches to the zone valves.
- Orient it with the direction of flow and support heavy pipe on both sides of the meter.
- Use PTFE tape on the NPT adaptors and tighten without forcing the fittings.
- Keep the LCD facing the walkway so readings can be checked on every round.
- Run the RJ12 cable to the Aqua-X Pro or an SPH-1 hub, away from wet areas.
- Enter each zone's target volume and confirm the first totals with a measured fill.
- A total that climbs on an unchanged program points to a leak worth chasing.
- A total that falls often means filters or drippers need attention.
- Flush the pipework before installation so debris does not catch inside the meter.
- Installed with care, it keeps large rooms on a consistent, measurable feed.
- 1.32 to 39.62 GPM range: Sized for 1.5 in irrigation mains.
- On-board LCD: Live flow rate and total volume at the pipe.
- Feed by Volume: Aqua-X Pro doses each cycle by gallons.
- Technical Specifications
Spezifikationen
- Model
- DFM-3
- Pipe size
- 1.5 in
- Flow range
- 1.32 to 39.62 GPM (5 to 150 L/min)
- Output
- Flow rate and total volume
- Compatible controller
- Aqua-X Pro (direct or via SPH-1 hub)
- Certifications
- CE, FCC, ETL
- Package size
- 255 x 135 x 80 mm
- Gross weight
- 1.37 lb
- Feed by Volume
- Aqua-X Pro doses each cycle by gallons.
Lass es uns für dein Projekt zum Laufen bringen
Bitte geben Sie in Ihrer Anfrage die gewünschte Menge, den Lieferort, die Anbaufläche sowie eventuelle Spannungs- oder Steckeranforderungen an. Spezifikationen, Verfügbarkeit, Versand- und Garantiebedingungen werden in Ihrem schriftlichen Angebot bestätigt.
Referenzumrechnung unter Verwendung des gespeicherten Wechselkurses vom 15.11.2026. Die umgerechneten Beträge stellen kein Angebot dar.
Mehr Möglichkeiten für Ihren Raum
‘Wood Lovr’ Organic Hardwood-Based Sterile Mushroom Substrate
‘Boomr Bag’ Manure-Based Sterile Mushroom Bulk Substrate
Fragen und Diskussion
Haben Sie eine Frage oder möchten Sie etwas Nützliches teilen? Starten Sie das Gespräch.