Ein vielversprechenderer Weg zum Wachstum. Großhandel direkt ab Werk. Mehr als 15 Jahre wachsende Expertise

Dieser Inhalt ist derzeit in seiner Originalsprache verfügbar.

Vermehrung & PflanzenpflegeGroßhandelsanfrage

ThunderVak Replacement Blades

Modell / Artikelnummer: 777877

ThunderVak Replacement Blades for the Composter Plus Leaf Trimmer

Type
Replacement cutting wires
Material
Nylon
QuellenreferenzpreisEUR 7.84

Nur zum Vergleich. Fordern Sie Ihren aktuellen Großhandelspreis, die Verfügbarkeit und die Lieferbedingungen an.

Keine Zahlung erforderlich. Ein Gespräch über Ihre Bedürfnisse.

Direkter WerkssupportMehr als 15 Jahre Erfahrung
EIN GENAUERER BLICK

Noch ein paar weitere Informationen zu diesem Produkt

ThunderVak Replacement Blades for the Composter Plus Leaf Trimmer

Product details

  • The ThunderVak trims with spinning nylon cords rather than steel knives, and these are the cords it uses.
  • Each wire is a length of round blue nylon with a crimped metal grommet on one end.
  • The grommet seats in the cutting spool on top of the base motor, so the wire stays put at full speed.
  • Fanned out around the spool, the wires sweep just under the aluminum grill.
  • Leaf that hangs through the grill gets clipped while the flower rides above it.
  • The machine runs 8 cutting wires at a time.
  • Nylon cuts cleanly without needing to be sharpened, and a worn wire is swapped for a fresh one.
  • Round blue wires are one of the two styles the trimmer accepts, alongside the octagonal red set.
  • Growers keep a spare set on the shelf so a nicked or shortened cord never stops a harvest.
  • The wires fit the ThunderVak Composter Plus leaf trimmer.
  • As a wear part, a fresh set is the quickest fix for an uneven cut.
  • Swapping Nylon Cutting Wires Between Batches
  • Turn both motors off and unplug the trimmer before touching the cutting area.
  • Lift off the upper reservoir and the grill to expose the spool.
  • Look over every wire for frayed ends, flat spots or missing length.
  • Slide a damaged wire out of its hole in the spool and throw it away.
  • Push a new wire in until its metal grommet seats firmly.
  • Repeat around the spool so the full set is fresh and even.
  • Matching lengths keep the cut level and the motor running smoothly.
  • Set the grill back on and make sure it sits flat on the motor support.
  • The trimming height is preset at the factory, so no adjustment is usually needed after a swap.
  • Run a small handful of material first to confirm the finish looks right.
  • Clean the cutting area after each session with a mild natural cleaner and a damp cloth.
  • Skip abrasive pads, which scratch the surfaces around the spool.
  • Store spare wires flat in a dry bag so they stay straight.
  • Checking the set before every run keeps the trim consistent from first batch to last.
  • Nylon Cutting Cord: Round blue nylon trims leaf cleanly and never needs sharpening.
  • Metal Grommet End: A crimped fitting locks each wire into the cutting spool at speed.

Spezifikationen

Type
Replacement cutting wires
Material
Nylon

Lass es uns für dein Projekt zum Laufen bringen

Bitte geben Sie in Ihrer Anfrage die gewünschte Menge, den Lieferort, die Anbaufläche sowie eventuelle Spannungs- oder Steckeranforderungen an. Spezifikationen, Verfügbarkeit, Versand- und Garantiebedingungen werden in Ihrem schriftlichen Angebot bestätigt.

Referenzumrechnung unter Verwendung des gespeicherten Wechselkurses vom 15.11.2026. Die umgerechneten Beträge stellen kein Angebot dar.

LASST UNS GEMEINSAM WACHSEN

Fragen und Diskussion

0

Haben Sie eine Frage oder möchten Sie etwas Nützliches teilen? Starten Sie das Gespräch.

WEITER ERKUNDEN

Mehr Möglichkeiten für Ihren Raum

Alle Produkte ansehen
DER BEGINN VON ETWAS GUTEM

Lass uns dein Projekt ans Licht bringen.

Schildern Sie uns kurz Ihre Anforderungen. Wir nutzen Ihre Angaben, um Ihnen ein passendes Angebot für den Großhandel zu unterbreiten.

Ihre Produktliste

Keine Zahlung. Keine Verpflichtung. Nur ein hilfreiches Gespräch.